fix(sql): 储存证 ACL 配置按钮授权给全部角色

迁移脚本为各租户有效角色补齐 storage-cert-qc-acl 菜单，使质检/生产权限入口对全部角色可见。

Co-authored-by: Cursor <cursoragent@cursor.com>

.agents/skills/personal-dev/SKILL.md

@@ -19,7 +19,7 @@ description: Use when starting a project, designing or prototyping project UI, i
 | 任务 | 读取 |
 | --- | --- |
 | 工单领取、并行会话、流程标签、转交、共享环境或合并排队 | [工单占用与隔离](references/issue-claims.md) |
-| 发送确认问题、请求用户操作、补发缺推荐或缺超时说明的旧题 | 先按[问题展示](references/planning.md#问题展示)在当前回复写出「待你确认」，完成[发问前检查](references/planning.md#发问前检查)后，再按[本地确认语音](references/question-notification.md)提醒 |
+| 发送确认问题、请求用户操作、补发缺推荐或缺超时说明的旧题 | 先按[问题展示](references/planning.md#问题展示)与 Cursor 宿主节在当前回复写出「待你确认」，完成[发问前检查](references/planning.md#发问前检查)后，再按[本地确认语音](references/question-notification.md)提醒；Cursor 下 `notify-question` 须为本轮最后一次工具且发问后停手 |
 | 关闭/恢复声音提醒 | [本地确认语音](references/question-notification.md) |
 | 空白工程、大需求、技术栈或架构变化 | [建设与规格](references/planning.md) |
 | 拉取工单、理解评论和截图、续接工单或交付前核对补充 | [工单全文、评论与图片](references/issue-context.md) |

.agents/skills/personal-dev/references/planning.md

@@ -43,6 +43,14 @@
 
 必须等待的题，最后一行写「未回复时：本题保持等待。」宿主问题卡片可以同时使用，卡片内容与这份清单一致。回复正文里没有「待你确认」时，不播放提示音，也不开始 60 秒计时。
 
+### Cursor / 工具先于正文的宿主
+
+Cursor Agent 等同轮「先跑工具、再出最终回复」的宿主上：
+
+1. 需要播音时，`notify-question` 只能作为本轮**最后一次**工具调用；最终可见回复必须以「待你确认」开头写全清单，本轮随后不得再编辑代码、开浏览器或继续依赖答复的实现。
+2. 承认提示音可能早于正文渲染数秒；用清单内一句「请在本会话回复；Queued 不是确认入口」消除错位。提示音整机可听，不保证当前聚焦会话就是发问会话。
+3. 工程若提供宿主适配说明（如 `docs/agents/cursor-question-visibility.md`），发问前按该说明执行；与本节冲突时以「用户必须看见清单」为准。
+
 ## 发问前检查
 
 每次发送确认问题（含调用宿主提问工具）前，逐题完成以下检查；缺项先改题，再按[问题展示](#问题展示)写入当前回复。这里是 Agent 的执行步骤，尚无自动拦截宿主问题卡片的校验器。

.agents/skills/personal-dev/references/question-notification.md

@@ -6,7 +6,8 @@
 
 1. 先核对用户/工程的静音选择。当前回复已经写上「待你确认」清单后，记录该批问题的发送时间、推荐及范围，再播放。回复里还没有这份清单时不播放，也不把这一轮当作已经发问。
 2. 每批问题只播放一次，多题合并发送共用一次提醒。将“已尝试提醒/结果”记在现有任务记录；同一批等待、轮询、重试和会话恢复不重复播放。真正重新提出的新问题或用户要求再提醒时才播放下一次。
-3. 执行以下已安装入口。它只读取随包预生成的本地 WAV，并调用播放器；不联网、不调用语音生成服务、不在提问时临时生成语音。命令最多等待播放器 12 秒，不另开后台常驻进程。
+3. **Cursor 等「工具先于最终正文」的宿主**：不得在仍要继续工具批处理时播放。需要播放时，将 `notify-question` 放在本轮最后一次工具调用，并保证同轮最终正文以「待你确认」清单为主体且本轮停手。提示音在整机播放、不绑定聊天标签；Queued/Multitasking 队列不是确认入口。工程适配见 `docs/agents/cursor-question-visibility.md`（若存在）。
+4. 执行以下已安装入口。它只读取随包预生成的本地 WAV，并调用播放器；不联网、不调用语音生成服务、不在提问时临时生成语音。命令最多等待播放器 12 秒，不另开后台常驻进程。
 
 ```sh
 python3 .agents/skills/personal-dev/scripts/pda.py notify-question --project .

.cursor/rules/personal-dev.mdc

@@ -1,8 +1,14 @@
 ---
-description: 个人开发体系的工程任务入口
+description: 个人开发体系的工程任务入口（含 Cursor 确认可见性）
 alwaysApply: true
 ---
 
-工程建设、界面设计或原型、需求开发、Bug 修复、验收反馈或提交/push/合并续聊时，先读根 AGENTS.md，再读取工程根目录的 .agents/skills/personal-dev/SKILL.md 进行任务分级。仅咨询概念时直接回答。业务约束仍按目标目录的 AGENTS.md 查阅。
+工程建设、界面设计或原型、需求开发、Bug 修复、验收反馈或提交/push/合并续聊时，先读根 `AGENTS.md`，再读取工程根目录的 `.agents/skills/personal-dev/SKILL.md` 进行任务分级。仅咨询概念时直接回答。业务约束仍按目标目录的 `AGENTS.md` 查阅。
 
-需要用户确认时，先在当前回复写出「待你确认」清单，再播放提示音。清单的写法以该 Skill 的问题展示规则为准。回复里没有这份清单时，不播放提示音。
+需要用户确认时：
+
+1. 先读 [Cursor 确认可见性](../../docs/agents/cursor-question-visibility.md)，再按 Skill 的问题展示规则发问。
+2. 本轮最终用户可见回复必须以「待你确认」清单为主体（含推荐与未回复处理）；写完清单前不播放提示音。
+3. 若播放提示音：`notify-question` 必须是本轮最后一次工具调用，且本轮随后不再继续编辑/浏览器/实现类工具。
+4. 清单中写明请在本会话回复；底部 Queued / Multitasking 不是确认入口。
+5. 回复正文没有「待你确认」时，不播放提示音。

backend/app/api/sample_storage_cert_qc.py

@@ -1,19 +1,28 @@
 """样本储存证质检信息 API"""
-from typing import Any, Dict, Optional
+from typing import Any, Dict, List, Optional
 
 from fastapi import APIRouter, Depends
 from pydantic import BaseModel, ConfigDict, Field
 from sqlalchemy.orm import Session
 
 from app.core.database import get_db
-from app.core.menu_guard import require_any_menu_code, require_strict_any_menu_code
+from app.core.menu_guard import (
+    require_any_menu_code,
+    require_strict_any_menu_code,
+    require_strict_menu_code,
+    strict_user_has_any_menu_perm,
+    strict_user_has_menu_perm,
+    user_has_menu_perm,
+)
 from app.core.response import error_response, success_response
 from app.crud import sample_storage_cert_qc as svc
+from app.crud import sample_storage_cert_qc_acl as acl_svc
 from app.models.models import SysUser
+from app.services.sample_storage_cert_qc import ACL_CONFIG_MENU
 
 router = APIRouter(prefix="/web/admin", tags=["储存证质检信息"])
 
-# 市场 / 质检 / 生产三端共用读写（方案 A：完整表后写覆盖）
+# 市场 / 质检 / 生产三端共用读写
 READ_MENUS = (
     "biz:qcWorkOrder:list",
     "biz:myQcTask:list",
@@ -41,6 +50,12 @@ def _get_current_user_id(user: dict) -> str:
     return str(user_id)
 
 
+def _can_configure_acl(db: Session, user: dict) -> bool:
+    return user_has_menu_perm(db, user, ACL_CONFIG_MENU) or strict_user_has_menu_perm(
+        db, user, ACL_CONFIG_MENU
+    )
+
+
 class UpsertBody(BaseModel):
     model_config = ConfigDict(populate_by_name=True)
 
@@ -48,6 +63,13 @@ class UpsertBody(BaseModel):
     qc_work_order_id: Optional[str] = Field(None, alias="qcWorkOrderId")
 
 
+class AclUpsertBody(BaseModel):
+    model_config = ConfigDict(populate_by_name=True)
+
+    field_keys: List[str] = Field(default_factory=list, alias="fieldKeys")
+    user_ids: List[str] = Field(default_factory=list, alias="userIds")
+
+
 @router.get("/sample-storage-cert-qc/{sample_code}")
 async def get_sample_storage_cert_qc(
     sample_code: str,
@@ -55,9 +77,19 @@ async def get_sample_storage_cert_qc(
     db: Session = Depends(get_db),
 ):
     tenant_no = _get_tenant_no(db, user)
+    user_id = _get_current_user_id(user)
     detail = svc.get_detail(db, tenant_no, sample_code)
     if detail is None:
         return error_response(404, "样本不存在")
+    has_legacy_write = strict_user_has_any_menu_perm(db, user, WRITE_MENUS)
+    svc.attach_acl_context(
+        db,
+        detail,
+        tenant_no=tenant_no,
+        user_id=user_id,
+        has_legacy_write=has_legacy_write,
+        can_configure_acl=_can_configure_acl(db, user),
+    )
     return success_response(detail)
 
 
@@ -70,6 +102,18 @@ async def put_sample_storage_cert_qc(
 ):
     tenant_no = _get_tenant_no(db, user)
     user_id = _get_current_user_id(user)
+    has_legacy_write = strict_user_has_any_menu_perm(db, user, WRITE_MENUS)
+    # 先用空 sampleTypeKey 解析严格模式名单；类型在 upsert 内再收窄
+    preview = svc.get_detail(db, tenant_no, sample_code)
+    if preview is None:
+        return error_response(404, "样本不存在")
+    editable = acl_svc.resolve_editable_field_keys(
+        db,
+        tenant_no=tenant_no,
+        user_id=user_id,
+        sample_type_key=preview.get("sampleTypeKey"),
+        has_legacy_write=has_legacy_write,
+    )
     try:
         detail = svc.upsert(
             db,
@@ -78,6 +122,54 @@ async def put_sample_storage_cert_qc(
             sample_code=sample_code,
             payload=body.payload,
             qc_work_order_id=body.qc_work_order_id,
+            editable_field_keys=editable,
+        )
+        svc.attach_acl_context(
+            db,
+            detail,
+            tenant_no=tenant_no,
+            user_id=user_id,
+            has_legacy_write=has_legacy_write,
+            can_configure_acl=_can_configure_acl(db, user),
+        )
+        return success_response(detail, message="保存成功")
+    except PermissionError as e:
+        return error_response(403, str(e))
+    except ValueError as e:
+        return error_response(400, str(e))
+
+
+@router.get("/sample-storage-cert-qc-acl/{scope}")
+async def get_sample_storage_cert_qc_acl(
+    scope: str,
+    user: dict = Depends(require_strict_menu_code(ACL_CONFIG_MENU, allow_super_admin=True)),
+    db: Session = Depends(get_db),
+):
+    tenant_no = _get_tenant_no(db, user)
+    try:
+        detail = acl_svc.get_acl_detail(db, tenant_no, scope)
+        return success_response(detail)
+    except ValueError as e:
+        return error_response(400, str(e))
+
+
+@router.put("/sample-storage-cert-qc-acl/{scope}")
+async def put_sample_storage_cert_qc_acl(
+    scope: str,
+    body: AclUpsertBody,
+    user: dict = Depends(require_strict_menu_code(ACL_CONFIG_MENU, allow_super_admin=True)),
+    db: Session = Depends(get_db),
+):
+    tenant_no = _get_tenant_no(db, user)
+    user_id = _get_current_user_id(user)
+    try:
+        detail = acl_svc.upsert_acl(
+            db,
+            tenant_no=tenant_no,
+            user_id=user_id,
+            scope=scope,
+            field_keys=body.field_keys,
+            user_ids=body.user_ids,
         )
         return success_response(detail, message="保存成功")
     except ValueError as e:

backend/app/core/db_collation.py

@@ -9,7 +9,19 @@ def unicode_ci(col):
 
 
 def eq_unicode(left, right):
-    """跨表字符串等值比较（JOIN / WHERE）时统一为 utf8mb4_unicode_ci。"""
+    """跨表字符串等值比较（JOIN / WHERE）时统一为 utf8mb4_unicode_ci。
+
+    列与列：两侧 collate。列与字面量：仅列侧 collate，避免连接 collation
+    （常见 utf8mb4_general_ci）与列 collation（utf8mb4_unicode_ci）混用。
+    """
+    left_is_str = isinstance(left, str)
+    right_is_str = isinstance(right, str)
+    if left_is_str and right_is_str:
+        return left == right
+    if left_is_str:
+        return left == unicode_ci(right)
+    if right_is_str:
+        return unicode_ci(left) == right
     return unicode_ci(left) == unicode_ci(right)
 
 

backend/app/crud/presign_order.py

@@ -576,12 +576,14 @@ def attach_presign_ledger_fields(
         }
     times_by_order: Dict[str, List[str]] = {}
     if order_ids:
+        # 与 confirmedDepositAmount 一致：仅已确认到账（yjf）计入刷卡时间
         transfers = (
             db.query(BizPresignTransfer)
             .filter(
                 BizPresignTransfer.presign_order_id.in_(order_ids),
                 BizPresignTransfer.tenant_no == tenant_no,
                 BizPresignTransfer.del_flag == 0,
+                BizPresignTransfer.pay_status == "yjf",
             )
             .order_by(
                 BizPresignTransfer.transfer_time.asc(),

backend/app/crud/production_work_order.py

@@ -94,7 +94,7 @@ def apply_planned_start_time_step_filter(
     planned_start_time_end: Optional[str] = None,
     mine_user_id: Optional[str] = None,
 ):
-    """按活跃工单/任务下未完成工艺步骤的计划开始时间过滤。"""
+    """按工艺步骤计划开始时间过滤；工单/任务/步骤状态由外层检索条件组合控制。"""
     start = (planned_start_time_start or "").strip()
     end = (planned_start_time_end or "").strip()
     if not start and not end:
@@ -104,15 +104,9 @@ def apply_planned_start_time_step_filter(
         BizProductionTaskStep.del_flag == 0,
         BizProductionTaskStep.tenant_no == tenant_no,
         BizProductionTaskStep.planned_start_time.isnot(None),
-        BizProductionTaskStep.step_status != "ywc",
         BizProductionTask.id == BizProductionTaskStep.task_id,
         BizProductionTask.del_flag == 0,
         BizProductionTask.tenant_no == tenant_no,
-        BizProductionTask.task_status.in_(("dpz", "jxz")),
-        BizProductionWorkOrder.id == BizProductionTask.work_order_id,
-        BizProductionWorkOrder.del_flag == 0,
-        BizProductionWorkOrder.tenant_no == tenant_no,
-        BizProductionWorkOrder.work_order_status.in_(("dpz", "jxz")),
         work_order_id_column == BizProductionTask.work_order_id,
     ]
     if start:

backend/app/crud/sample_storage_cert_qc.py

@@ -15,12 +15,14 @@ from app.models.models import (
     BizProtocolSample,
     BizSampleStorageCertQc,
 )
+from app.crud import sample_storage_cert_qc_acl as acl_svc
 from app.services.sample_storage_cert_qc import (
     dumps_payload,
     empty_detail,
     loads_payload,
-    normalize_payload,
+    merge_payload_with_acl,
     resolve_sample_type_key,
+    sanitize_payload_for_type,
 )
 from app.services.sample_storage_cert_qc_prefill import collect_prefill
 
@@ -44,7 +46,7 @@ def _row_to_dict(
         "collectionProtocolId": row.collection_protocol_id or "",
         "qcWorkOrderId": row.qc_work_order_id or "",
         "filledFlag": str(row.filled_flag or "0") == "1",
-        "payload": loads_payload(row.payload),
+        "payload": sanitize_payload_for_type(loads_payload(row.payload), row.sample_type_key),
         "createTime": row.create_time.isoformat(sep=" ", timespec="seconds") if row.create_time else "",
         "updateTime": row.update_time.isoformat(sep=" ", timespec="seconds") if row.update_time else "",
     }
@@ -165,6 +167,7 @@ def upsert(
     sample_code: str,
     payload: Any,
     qc_work_order_id: Optional[str] = None,
+    editable_field_keys: Optional[list] = None,
 ) -> Dict[str, Any]:
     ctx = _load_sample_context(db, tenant_no, sample_code)
     if not ctx:
@@ -173,7 +176,6 @@ def upsert(
     key = resolve_sample_type_key(type_name)
     if not key:
         raise ValueError("该样本类型不支持填写储存证质检信息")
-    clean = normalize_payload(payload)
     now = datetime.now()
     row = (
         db.query(BizSampleStorageCertQc)
@@ -184,6 +186,14 @@ def upsert(
         )
         .first()
     )
+    existing = loads_payload(row.payload) if row else {}
+    allowed = list(editable_field_keys or [])
+    clean = merge_payload_with_acl(
+        existing=existing,
+        incoming=payload,
+        editable_keys=allowed,
+        sample_type_key=key,
+    )
     if not row:
         row = BizSampleStorageCertQc(
             id=generate_uuid(),
@@ -220,3 +230,24 @@ def upsert(
         mother_name=mother_name,
         sample_type_name=type_name,
     )
+
+
+def attach_acl_context(
+    db: Session,
+    detail: Dict[str, Any],
+    *,
+    tenant_no: str,
+    user_id: str,
+    has_legacy_write: bool,
+    can_configure_acl: bool,
+) -> Dict[str, Any]:
+    detail["editableFieldKeys"] = acl_svc.resolve_editable_field_keys(
+        db,
+        tenant_no=tenant_no,
+        user_id=user_id,
+        sample_type_key=detail.get("sampleTypeKey"),
+        has_legacy_write=has_legacy_write,
+    )
+    detail["canConfigureAcl"] = bool(can_configure_acl)
+    detail["aclStrict"] = acl_svc.is_acl_strict(db, tenant_no)
+    return detail

backend/app/crud/sample_storage_cert_qc_acl.py

@@ -0,0 +1,272 @@
+"""储存证质检字段 ACL CRUD。"""
+from __future__ import annotations
+
+from datetime import datetime
+from typing import Any, Dict, List, Optional, Set
+
+from sqlalchemy.orm import Session
+
+from app.core.db_collation import eq_unicode, unicode_ci
+from app.core.utils import generate_uuid
+from app.crud.child_row_sync import sync_child_rows
+from app.models.models import BizStorageCertQcAcl, BizStorageCertQcAclUser, SysUser
+from app.services.sample_storage_cert_qc import (
+    ACL_SCOPES,
+    ALL_STORAGE_CERT_QC_FIELD_KEYS,
+    dumps_field_keys,
+    legal_field_keys_for_type,
+    loads_field_keys,
+)
+
+
+def is_acl_strict(db: Session, tenant_no: str) -> bool:
+    row = (
+        db.query(BizStorageCertQcAcl.id)
+        .filter(
+            eq_unicode(BizStorageCertQcAcl.tenant_no, tenant_no),
+            eq_unicode(BizStorageCertQcAcl.configured_flag, "1"),
+            BizStorageCertQcAcl.del_flag == 0,
+        )
+        .first()
+    )
+    return row is not None
+
+
+def resolve_editable_field_keys(
+    db: Session,
+    *,
+    tenant_no: str,
+    user_id: str,
+    sample_type_key: Optional[str],
+    has_legacy_write: bool,
+) -> List[str]:
+    legal = legal_field_keys_for_type(sample_type_key)
+    if not is_acl_strict(db, tenant_no):
+        return sorted(legal) if has_legacy_write else []
+    uid = (user_id or "").strip()
+    if not uid:
+        return []
+    acls = (
+        db.query(BizStorageCertQcAcl)
+        .filter(
+            eq_unicode(BizStorageCertQcAcl.tenant_no, tenant_no),
+            eq_unicode(BizStorageCertQcAcl.configured_flag, "1"),
+            BizStorageCertQcAcl.del_flag == 0,
+        )
+        .all()
+    )
+    if not acls:
+        return []
+    acl_ids = [row.id for row in acls]
+    membership = (
+        db.query(BizStorageCertQcAclUser.acl_id)
+        .filter(
+            eq_unicode(BizStorageCertQcAclUser.tenant_no, tenant_no),
+            unicode_ci(BizStorageCertQcAclUser.acl_id).in_(acl_ids),
+            eq_unicode(BizStorageCertQcAclUser.user_id, uid),
+            BizStorageCertQcAclUser.del_flag == 0,
+        )
+        .all()
+    )
+    member_acl_ids = {row[0] for row in membership}
+    keys: Set[str] = set()
+    for acl in acls:
+        if acl.id not in member_acl_ids:
+            continue
+        keys.update(loads_field_keys(acl.field_keys))
+    return sorted(keys & legal)
+
+
+def _validate_scope(scope: str) -> str:
+    value = (scope or "").strip()
+    if value not in ACL_SCOPES:
+        raise ValueError("scope 必须为 qc 或 production")
+    return value
+
+
+def _validate_field_keys(field_keys: Any) -> List[str]:
+    if not isinstance(field_keys, list):
+        raise ValueError("fieldKeys 必须为数组")
+    out: List[str] = []
+    seen = set()
+    for item in field_keys:
+        key = str(item or "").strip()
+        if not key or key in seen:
+            continue
+        if key not in ALL_STORAGE_CERT_QC_FIELD_KEYS:
+            raise ValueError(f"非法字段: {key}")
+        seen.add(key)
+        out.append(key)
+    return out
+
+
+def _validate_user_ids(db: Session, tenant_no: str, user_ids: Any) -> List[str]:
+    if not isinstance(user_ids, list):
+        raise ValueError("userIds 必须为数组")
+    out: List[str] = []
+    seen = set()
+    for item in user_ids:
+        uid = str(item or "").strip()
+        if not uid or uid in seen:
+            continue
+        seen.add(uid)
+        out.append(uid)
+    if not out:
+        return []
+    rows = (
+        db.query(SysUser.id)
+        .filter(
+            eq_unicode(SysUser.tenant_no, tenant_no),
+            unicode_ci(SysUser.id).in_(out),
+            SysUser.del_flag == 0,
+        )
+        .all()
+    )
+    found = {row[0] for row in rows}
+    missing = [uid for uid in out if uid not in found]
+    if missing:
+        raise ValueError(f"用户不存在或不属于当前租户: {','.join(missing[:5])}")
+    return out
+
+
+def get_acl_detail(db: Session, tenant_no: str, scope: str) -> Dict[str, Any]:
+    scope_key = _validate_scope(scope)
+    row = (
+        db.query(BizStorageCertQcAcl)
+        .filter(
+            eq_unicode(BizStorageCertQcAcl.tenant_no, tenant_no),
+            eq_unicode(BizStorageCertQcAcl.scope, scope_key),
+            BizStorageCertQcAcl.del_flag == 0,
+        )
+        .first()
+    )
+    if not row:
+        return {
+            "scope": scope_key,
+            "fieldKeys": [],
+            "userIds": [],
+            "users": [],
+            "configuredFlag": False,
+            "aclStrict": is_acl_strict(db, tenant_no),
+        }
+    users = (
+        db.query(BizStorageCertQcAclUser, SysUser)
+        .outerjoin(
+            SysUser,
+            eq_unicode(SysUser.id, BizStorageCertQcAclUser.user_id) & (SysUser.del_flag == 0),
+        )
+        .filter(
+            eq_unicode(BizStorageCertQcAclUser.tenant_no, tenant_no),
+            eq_unicode(BizStorageCertQcAclUser.acl_id, row.id),
+            BizStorageCertQcAclUser.del_flag == 0,
+        )
+        .order_by(BizStorageCertQcAclUser.order_num.asc(), BizStorageCertQcAclUser.create_time.asc())
+        .all()
+    )
+    user_ids: List[str] = []
+    user_rows: List[Dict[str, str]] = []
+    for link, user in users:
+        uid = link.user_id or ""
+        if not uid:
+            continue
+        user_ids.append(uid)
+        user_rows.append(
+            {
+                "id": uid,
+                "nickName": (user.nick_name if user else "") or "",
+                "userName": (user.user_no if user else "") or "",
+            }
+        )
+    return {
+        "scope": scope_key,
+        "fieldKeys": loads_field_keys(row.field_keys),
+        "userIds": user_ids,
+        "users": user_rows,
+        "configuredFlag": str(row.configured_flag or "0") == "1",
+        "aclStrict": is_acl_strict(db, tenant_no),
+    }
+
+
+def upsert_acl(
+    db: Session,
+    *,
+    tenant_no: str,
+    user_id: str,
+    scope: str,
+    field_keys: Any,
+    user_ids: Any,
+) -> Dict[str, Any]:
+    scope_key = _validate_scope(scope)
+    keys = _validate_field_keys(field_keys)
+    users = _validate_user_ids(db, tenant_no, user_ids)
+    now = datetime.now()
+    row = (
+        db.query(BizStorageCertQcAcl)
+        .filter(
+            eq_unicode(BizStorageCertQcAcl.tenant_no, tenant_no),
+            eq_unicode(BizStorageCertQcAcl.scope, scope_key),
+            BizStorageCertQcAcl.del_flag == 0,
+        )
+        .first()
+    )
+    if not row:
+        row = BizStorageCertQcAcl(
+            id=generate_uuid(),
+            scope=scope_key,
+            field_keys=dumps_field_keys(keys),
+            configured_flag="1",
+            tenant_no=tenant_no,
+            create_by=user_id,
+            create_dept_id="",
+            create_time=now,
+            update_by=user_id,
+            update_time=now,
+            del_flag=0,
+        )
+        db.add(row)
+        db.flush()
+    else:
+        row.field_keys = dumps_field_keys(keys)
+        row.configured_flag = "1"
+        row.update_by = user_id
+        row.update_time = now
+
+    def _build_row(new_id: str):
+        return BizStorageCertQcAclUser(
+            id=new_id,
+            acl_id=row.id,
+            user_id="",
+            tenant_no=tenant_no,
+            create_by=user_id,
+            create_dept_id="",
+            create_time=now,
+            update_by=user_id,
+            update_time=now,
+            del_flag=0,
+        )
+
+    def _apply_fields(link, item: Dict[str, Any], index: int, ts: datetime):
+        link.user_id = str(item.get("userId") or "").strip()
+        link.tenant_no = tenant_no
+        link.order_num = index
+        link.update_by = user_id
+        link.update_time = ts
+
+    sync_child_rows(
+        db,
+        BizStorageCertQcAclUser,
+        parent_attr="acl_id",
+        parent_id=row.id,
+        items=[{"userId": uid} for uid in users],
+        build_row=_build_row,
+        apply_fields=_apply_fields,
+        tenant_no=tenant_no,
+        user_id=user_id,
+        now=now,
+        natural_key=lambda item: str(item.get("userId") or "").strip(),
+        row_natural_key=lambda link: str(getattr(link, "user_id", "") or "").strip(),
+        duplicate_message="人员重复",
+        foreign_message="人员记录不属于当前 ACL",
+    )
+    db.commit()
+    return get_acl_detail(db, tenant_no, scope_key)

backend/app/models/models.py

@@ -1779,6 +1779,45 @@ class BizSampleStorageCertQc(Base):
     del_flag = Column(SmallInteger, nullable=False, default=0, comment="删除标记")
 
 
+class BizStorageCertQcAcl(Base):
+    """储存证质检字段 ACL 主表 biz_storage_cert_qc_acl"""
+
+    __tablename__ = "biz_storage_cert_qc_acl"
+
+    id = Column(String(64), primary_key=True, comment="主键ID")
+    scope = Column(String(32), nullable=False, comment="qc|production")
+    field_keys = Column(Text, nullable=False, comment="可编辑字段 key JSON 数组")
+    configured_flag = Column(CHAR(1), nullable=False, default="0", comment="是否已正式配置 0否1是")
+    tenant_no = Column(String(64), nullable=False, default="zkxw", comment="租户编号")
+    order_num = Column(Integer, nullable=True, comment="排序号")
+    remark = Column(String(512), nullable=True, comment="备注")
+    create_by = Column(String(64), nullable=True, comment="创建人id")
+    create_dept_id = Column(String(64), nullable=False, default="", comment="创建人部门ID")
+    create_time = Column(DateTime, nullable=False, default=datetime.now, comment="创建时间")
+    update_by = Column(String(64), nullable=True, comment="更新人id")
+    update_time = Column(DateTime, nullable=False, default=datetime.now, onupdate=datetime.now, comment="更新时间")
+    del_flag = Column(SmallInteger, nullable=False, default=0, comment="删除标记")
+
+
+class BizStorageCertQcAclUser(Base):
+    """储存证质检字段 ACL 人员子表 biz_storage_cert_qc_acl_user"""
+
+    __tablename__ = "biz_storage_cert_qc_acl_user"
+
+    id = Column(String(64), primary_key=True, comment="主键ID")
+    acl_id = Column(String(64), nullable=False, comment="ACL 主表ID")
+    user_id = Column(String(64), nullable=False, comment="可编辑用户ID")
+    tenant_no = Column(String(64), nullable=False, default="zkxw", comment="租户编号")
+    order_num = Column(Integer, nullable=True, comment="排序号")
+    remark = Column(String(512), nullable=True, comment="备注")
+    create_by = Column(String(64), nullable=True, comment="创建人id")
+    create_dept_id = Column(String(64), nullable=False, default="", comment="创建人部门ID")
+    create_time = Column(DateTime, nullable=False, default=datetime.now, comment="创建时间")
+    update_by = Column(String(64), nullable=True, comment="更新人id")
+    update_time = Column(DateTime, nullable=False, default=datetime.now, onupdate=datetime.now, comment="更新时间")
+    del_flag = Column(SmallInteger, nullable=False, default=0, comment="删除标记")
+
+
 class BizSampleCodeCorrectionLog(Base):
     """样本编码纠错审计日志 biz_sample_code_correction_log"""
 

backend/app/services/qc_work_order_fee_summary.py

@@ -14,6 +14,7 @@ from app.models.models import (
     BizProtocolPaymentDetail,
     BizProtocolPaymentSchedule,
     BizProtocolPaymentTransfer,
+    BizProtocolRefundRecord,
     BizProtocolSamplePayment,
 )
 
@@ -229,6 +230,197 @@ def _first_period_first_transfer_times(
     return {pid: _fmt_dt(t) for pid, t in earliest.items() if _fmt_dt(t)}
 
 
+def _received_amount_from_transfers(transfers: List[BizProtocolPaymentTransfer]) -> float:
+    total = Decimal("0")
+    for t in transfers:
+        st = (t.pay_status or "").strip()
+        if st in ("yjf", "jfqrz"):
+            total += t.transfer_amount or Decimal("0")
+    return float(total)
+
+
+def _v2_schedule_detail_rows(
+    schedules: List[BizProtocolPaymentSchedule],
+    transfers: List[BizProtocolPaymentTransfer],
+    pay_mode: str,
+) -> List[Dict[str, Any]]:
+    by_schedule: Dict[str, List[BizProtocolPaymentTransfer]] = {}
+    for t in transfers:
+        sid = (t.schedule_id or "").strip()
+        if sid:
+            by_schedule.setdefault(sid, []).append(t)
+    active = [
+        s
+        for s in schedules
+        if (s.schedule_status or "").strip() != "void"
+    ]
+    active.sort(
+        key=lambda s: (
+            s.schedule_no if s.schedule_no is not None else 10_000,
+            s.order_num if s.order_num is not None else 0,
+            s.create_time or datetime.min,
+        )
+    )
+    rows: List[Dict[str, Any]] = []
+    for idx, sch in enumerate(active):
+        sch_transfers = by_schedule.get(sch.id, [])
+        paid = [
+            t
+            for t in sch_transfers
+            if (t.pay_status or "").strip() in ("yjf", "jfqrz")
+        ]
+        paid_amount = _received_amount_from_transfers(paid) if paid else None
+        statuses = [(t.pay_status or "").strip() for t in sch_transfers if (t.pay_status or "").strip()]
+        if "jfqrz" in statuses:
+            st = "jfqrz"
+        elif "yjf" in statuses and paid:
+            st = "yjf"
+        elif statuses:
+            st = statuses[0]
+        else:
+            st = "dfj"
+        times = [t.transfer_time for t in paid if t.transfer_time is not None]
+        transfer_time = _fmt_dt(min(times)) if times else ""
+        inst_no = sch.schedule_no
+        if pay_mode in ("fq", "djfq") and inst_no is not None:
+            label = f"第{inst_no}期"
+        else:
+            label = f"缴费{idx + 1}"
+        rows.append(
+            {
+                "installmentNo": inst_no,
+                "installmentLabel": label,
+                "installmentDueDate": _fmt_ymd(sch.due_date),
+                "dueAmount": _dec(sch.due_amount),
+                "transferAmount": paid_amount,
+                "refundAmount": None,
+                "payStatus": st,
+                "payStatusLabel": _PAY_STATUS_LABELS.get(st, st or "—"),
+                "transferTime": transfer_time,
+            }
+        )
+    return rows
+
+
+def _load_v2_protocol_payment_amounts(
+    db: Session,
+    protocol_ids: List[str],
+    tenant_no: str,
+) -> Dict[str, Dict[str, Any]]:
+    """按协议汇总 V2 样本缴费合同额、已收、明细与退费（仅 list/export 摘要用）。"""
+    ids = [x.strip() for x in protocol_ids if (x or "").strip()]
+    if not ids:
+        return {}
+    samples = (
+        db.query(BizProtocolSamplePayment)
+        .filter(
+            BizProtocolSamplePayment.collection_protocol_id.in_(ids),
+            BizProtocolSamplePayment.tenant_no == tenant_no,
+            BizProtocolSamplePayment.del_flag == 0,
+        )
+        .all()
+    )
+    if not samples:
+        return {}
+    schedules = (
+        db.query(BizProtocolPaymentSchedule)
+        .filter(
+            BizProtocolPaymentSchedule.collection_protocol_id.in_(ids),
+            BizProtocolPaymentSchedule.tenant_no == tenant_no,
+            BizProtocolPaymentSchedule.del_flag == 0,
+        )
+        .all()
+    )
+    transfers = (
+        db.query(BizProtocolPaymentTransfer)
+        .filter(
+            BizProtocolPaymentTransfer.collection_protocol_id.in_(ids),
+            BizProtocolPaymentTransfer.tenant_no == tenant_no,
+            BizProtocolPaymentTransfer.del_flag == 0,
+        )
+        .all()
+    )
+    refunds = (
+        db.query(BizProtocolRefundRecord)
+        .filter(
+            BizProtocolRefundRecord.collection_protocol_id.in_(ids),
+            BizProtocolRefundRecord.tenant_no == tenant_no,
+            BizProtocolRefundRecord.del_flag == 0,
+        )
+        .all()
+    )
+    samples_by: Dict[str, List[BizProtocolSamplePayment]] = {}
+    for sp in samples:
+        samples_by.setdefault(sp.collection_protocol_id, []).append(sp)
+    schedules_by: Dict[str, List[BizProtocolPaymentSchedule]] = {}
+    for s in schedules:
+        schedules_by.setdefault(s.collection_protocol_id, []).append(s)
+    transfers_by: Dict[str, List[BizProtocolPaymentTransfer]] = {}
+    for t in transfers:
+        transfers_by.setdefault(t.collection_protocol_id, []).append(t)
+    refund_by: Dict[str, float] = {}
+    refund_seen: Dict[str, bool] = {}
+    for r in refunds:
+        amt = _dec(r.refund_amount)
+        if amt is None:
+            continue
+        refund_seen[r.collection_protocol_id] = True
+        refund_by[r.collection_protocol_id] = refund_by.get(r.collection_protocol_id, 0.0) + float(amt)
+
+    out: Dict[str, Dict[str, Any]] = {}
+    for pid, sp_list in samples_by.items():
+        modes = {(sp.pay_mode or "").strip() for sp in sp_list if (sp.pay_mode or "").strip()}
+        ordered_modes = sorted(
+            modes,
+            key=lambda mode: ({"dj": 0, "fq": 1, "djfq": 2, "fgd": 3}.get(mode, 99), mode),
+        )
+        if modes == {"dj", "fq"}:
+            pay_mode = "djfq"
+        else:
+            pay_mode = "+".join(ordered_modes) if ordered_modes else ""
+        contract_total = Decimal("0")
+        has_contract = False
+        for sp in sp_list:
+            if sp.contract_amount is not None:
+                has_contract = True
+                contract_total += sp.contract_amount or Decimal("0")
+        contract = float(contract_total) if has_contract else None
+        proto_transfers = transfers_by.get(pid, [])
+        received = _received_amount_from_transfers(proto_transfers)
+        pending = max(contract - received, 0) if contract is not None else None
+        detail_rows = _v2_schedule_detail_rows(
+            schedules_by.get(pid, []),
+            proto_transfers,
+            pay_mode,
+        )
+        statuses = [(t.pay_status or "").strip() for t in proto_transfers]
+        overall = _protocol_overall_status(statuses, contract, pending)
+        hint = _protocol_status_hint(pay_mode, statuses) or overall["overallPayStatusLabel"]
+        installment_count = None
+        if pay_mode in ("fq", "djfq"):
+            installment_count = len(
+                {
+                    d.get("installmentNo")
+                    for d in detail_rows
+                    if d.get("installmentNo") is not None
+                }
+            ) or len(detail_rows)
+        payload: Dict[str, Any] = {
+            "payMode": pay_mode,
+            "contractAmount": contract,
+            "receivedAmount": received,
+            "pendingAmount": pending,
+            "statusHint": hint,
+            "installmentCount": installment_count,
+            "paymentDetails": detail_rows,
+            **overall,
+        }
+        if refund_seen.get(pid):
+            payload["refundAmount"] = refund_by.get(pid, 0.0)
+        out[pid] = payload
+    return out
+
+
 def build_protocol_payment_summaries(
     db: Session,
     protocol_ids: List[str],
@@ -263,6 +455,7 @@ def build_protocol_payment_summaries(
         ):
             details_by_payment.setdefault(d.payment_id, []).append(d)
     sample_modes: Dict[str, set] = {}
+    v2_amounts: Dict[str, Dict[str, Any]] = {}
     if include_sample_payment_modes:
         for pid, mode in db.query(
             BizProtocolSamplePayment.collection_protocol_id,
@@ -274,6 +467,7 @@ def build_protocol_payment_summaries(
         ).all():
             if mode:
                 sample_modes.setdefault(pid, set()).add(mode)
+        v2_amounts = _load_v2_protocol_payment_amounts(db, ids, tenant_no)
     first_pay_map = _first_period_first_transfer_times(db, ids, tenant_no)
     out: Dict[str, Dict[str, Any]] = {}
     for pid in ids:
@@ -285,7 +479,8 @@ def build_protocol_payment_summaries(
         )
         first_pay = first_pay_map.get(pid) or ""
         modes = sample_modes.get(pid, set())
-        if not summary and not first_pay and not modes:
+        v2 = v2_amounts.get(pid)
+        if not summary and not first_pay and not modes and not v2:
             continue
         if not summary:
             summary = {
@@ -294,6 +489,7 @@ def build_protocol_payment_summaries(
                 "contractAmount": None,
                 "receivedAmount": None,
                 "pendingAmount": None,
+                "refundAmount": None,
                 "statusHint": "",
                 "installmentCount": None,
                 "paymentDetails": [],
@@ -309,6 +505,27 @@ def build_protocol_payment_summaries(
             labels = {**_PAY_MODE_LABELS, "fgd": "分改趸"}
             summary["payMode"] = "djfq" if modes == {"dj", "fq"} else "+".join(ordered_modes)
             summary["payModeLabel"] = "+".join(labels.get(mode, mode) for mode in ordered_modes)
+        # V1 摘要缺已收金额时，用 V2 样本缴费补齐（自存表导出 / 协议列表依赖）。
+        if v2 and summary.get("receivedAmount") is None:
+            if summary.get("contractAmount") is None:
+                summary["contractAmount"] = v2.get("contractAmount")
+            summary["receivedAmount"] = v2.get("receivedAmount")
+            if summary.get("pendingAmount") is None:
+                summary["pendingAmount"] = v2.get("pendingAmount")
+            if not summary.get("paymentDetails"):
+                summary["paymentDetails"] = v2.get("paymentDetails") or []
+            if summary.get("installmentCount") is None:
+                summary["installmentCount"] = v2.get("installmentCount")
+            if summary.get("refundAmount") is None and "refundAmount" in v2:
+                summary["refundAmount"] = v2.get("refundAmount")
+            for key in (
+                "statusHint",
+                "overallPayStatus",
+                "overallPayStatusLabel",
+                "overallPayStatusTagType",
+            ):
+                if not summary.get(key) and v2.get(key):
+                    summary[key] = v2.get(key)
         if first_pay:
             summary["firstPayTransferTime"] = first_pay
         out[pid] = summary

backend/app/services/sample_storage_cert_qc.py

@@ -2,18 +2,78 @@
 from __future__ import annotations
 
 import json
-from typing import Any, Dict, Optional
+from typing import Any, Dict, Iterable, List, Optional, Set
 
 SAMPLE_TYPE_NAME_PERINATAL_HSC = "围产期造血干细胞"
 SAMPLE_TYPE_NAME_UC_MSC = "脐带间充质干细胞"
 SAMPLE_TYPE_KEY_PERINATAL_HSC = "perinatal_hsc"
 SAMPLE_TYPE_KEY_UC_MSC = "uc_msc"
 
+ACL_SCOPE_QC = "qc"
+ACL_SCOPE_PRODUCTION = "production"
+ACL_SCOPES = frozenset({ACL_SCOPE_QC, ACL_SCOPE_PRODUCTION})
+ACL_CONFIG_MENU = "cell-storage:sample-info:storage-cert-qc-acl"
+
 _NAME_TO_KEY = {
     SAMPLE_TYPE_NAME_PERINATAL_HSC: SAMPLE_TYPE_KEY_PERINATAL_HSC,
     SAMPLE_TYPE_NAME_UC_MSC: SAMPLE_TYPE_KEY_UC_MSC,
 }
 
+# 与 web-admin STORAGE_CERT_QC_GROUPS 对齐的合法 payload 键（两类型并集）。
+ALL_STORAGE_CERT_QC_FIELD_KEYS = frozenset(
+    {
+        "collection_time",
+        "transport_temp_c",
+        "receive_time",
+        "cryo_volume_ml",
+        "tnc_1e8",
+        "cd34_count_1e6",
+        "cd34_cd45dim_1e5",
+        "viability_pct",
+        "bacteria_test",
+        "hbsag",
+        "anti_hcv",
+        "anti_tp",
+        "anti_hiv",
+        "cmv_igm",
+        "mother_hbsag",
+        "mother_hbv_dna",
+        "mother_anti_hcv",
+        "mother_hcv_rna",
+        "mother_anti_tp",
+        "mother_cmv_igm",
+        "mother_anti_hiv",
+        "mother_hiv1_rna",
+        "hla_typing",
+        "storage_date",
+        "storage_years",
+        "result_comment",
+        "report_issue_date",
+        "storage_tube_count",
+        "available_cell_type",
+        "available_cell_count_1e7",
+        "available_viability_pct",
+        "endotoxin_test",
+        "fungus_test",
+        "mycoplasma_test",
+        "available_cell_morphology",
+        "available_immunophenotype",
+        "result_judgment",
+        "storage_date_p2",
+        "freeze_method",
+        "storage_temp",
+    }
+)
+
+# 脐带间充质储存证不收录母亲血液三项核酸检测。
+UC_MSC_EXCLUDED_PAYLOAD_KEYS = frozenset(
+    {
+        "mother_hbv_dna",
+        "mother_hcv_rna",
+        "mother_hiv1_rna",
+    }
+)
+
 
 def resolve_sample_type_key(sample_type_name: Optional[str]) -> Optional[str]:
     name = (sample_type_name or "").strip()
@@ -24,6 +84,13 @@ def supports_storage_cert_qc(sample_type_name: Optional[str]) -> bool:
     return resolve_sample_type_key(sample_type_name) is not None
 
 
+def legal_field_keys_for_type(sample_type_key: Optional[str]) -> Set[str]:
+    keys = set(ALL_STORAGE_CERT_QC_FIELD_KEYS)
+    if sample_type_key == SAMPLE_TYPE_KEY_UC_MSC:
+        keys -= UC_MSC_EXCLUDED_PAYLOAD_KEYS
+    return keys
+
+
 def normalize_payload(payload: Any) -> Dict[str, Any]:
     if not isinstance(payload, dict):
         raise ValueError("payload 必须为对象")
@@ -38,6 +105,16 @@ def normalize_payload(payload: Any) -> Dict[str, Any]:
     return out
 
 
+def sanitize_payload_for_type(
+    payload: Dict[str, Any],
+    sample_type_key: Optional[str],
+) -> Dict[str, Any]:
+    """按样本类型去掉不应展示/落库的键。"""
+    if sample_type_key != SAMPLE_TYPE_KEY_UC_MSC:
+        return payload
+    return {key: value for key, value in payload.items() if key not in UC_MSC_EXCLUDED_PAYLOAD_KEYS}
+
+
 def dumps_payload(payload: Dict[str, Any]) -> str:
     return json.dumps(payload, ensure_ascii=False, separators=(",", ":"))
 
@@ -54,6 +131,62 @@ def loads_payload(raw: Optional[str]) -> Dict[str, Any]:
     return data
 
 
+def dumps_field_keys(keys: Iterable[str]) -> str:
+    cleaned = sorted({str(k).strip() for k in keys if str(k).strip()})
+    return json.dumps(cleaned, ensure_ascii=False, separators=(",", ":"))
+
+
+def loads_field_keys(raw: Optional[str]) -> List[str]:
+    if not raw:
+        return []
+    try:
+        data = json.loads(raw)
+    except (TypeError, ValueError):
+        return []
+    if not isinstance(data, list):
+        return []
+    out: List[str] = []
+    seen = set()
+    for item in data:
+        key = str(item or "").strip()
+        if not key or key in seen:
+            continue
+        seen.add(key)
+        out.append(key)
+    return out
+
+
+def _payload_value_text(value: Any) -> str:
+    if value is None:
+        return ""
+    return str(value).strip()
+
+
+def merge_payload_with_acl(
+    *,
+    existing: Dict[str, Any],
+    incoming: Dict[str, Any],
+    editable_keys: Iterable[str],
+    sample_type_key: Optional[str],
+) -> Dict[str, Any]:
+    """仅合并有权字段；无权字段若相对原值变化则拒绝。"""
+    allowed = {str(k).strip() for k in editable_keys if str(k).strip()}
+    if not allowed:
+        raise PermissionError("无字段编辑权限")
+    clean_incoming = sanitize_payload_for_type(normalize_payload(incoming), sample_type_key)
+    base = sanitize_payload_for_type(dict(existing or {}), sample_type_key)
+    for key, value in clean_incoming.items():
+        if key in allowed:
+            continue
+        if _payload_value_text(base.get(key)) != _payload_value_text(value):
+            raise PermissionError(f"无权修改字段: {key}")
+    merged = dict(base)
+    for key in allowed:
+        if key in clean_incoming:
+            merged[key] = clean_incoming[key]
+    return sanitize_payload_for_type(merged, sample_type_key)
+
+
 def empty_detail(
     *,
     sample_code: str,

backend/app/services/sample_storage_cert_qc_prefill.py

@@ -168,6 +168,11 @@ _HSC_SEROLOGY_RULES = (
 )
 
 _MOTHER_SEROLOGY_RULES = tuple(rule for rule in _HSC_SEROLOGY_RULES if str(rule[0]).startswith("mother_"))
+# 脐带间充质不预填母亲血液三项核酸。
+_UC_MSC_EXCLUDED_MOTHER_KEYS = frozenset({"mother_hbv_dna", "mother_hcv_rna", "mother_hiv1_rna"})
+_MOTHER_SEROLOGY_RULES_UC_MSC = tuple(
+    rule for rule in _MOTHER_SEROLOGY_RULES if str(rule[0]) not in _UC_MSC_EXCLUDED_MOTHER_KEYS
+)
 
 
 def _serology_from_tasks(
@@ -278,9 +283,19 @@ def _process_qual_from_tasks(tasks: List[Dict[str, Any]]) -> Dict[str, str]:
     return out
 
 
-def _fill_shared_mother(suggested: Dict[str, str], tasks: Optional[List[Dict[str, Any]]]) -> None:
+def _fill_shared_mother(
+    suggested: Dict[str, str],
+    tasks: Optional[List[Dict[str, Any]]],
+    *,
+    sample_type_key: str,
+) -> None:
     """只补母亲血液空项。共享任务里的脐血不参与。"""
-    shared = _serology_from_tasks(tasks or [], _MOTHER_SEROLOGY_RULES)
+    rules = (
+        _MOTHER_SEROLOGY_RULES_UC_MSC
+        if sample_type_key == "uc_msc"
+        else _MOTHER_SEROLOGY_RULES
+    )
+    shared = _serology_from_tasks(tasks or [], rules)
     for key, value in shared.items():
         suggested.setdefault(key, value)
 
@@ -330,7 +345,7 @@ def build_suggested(
         if count:
             suggested["available_cell_count_1e7"] = count
         suggested.update(_process_qual_from_tasks(process_tasks or []))
-        suggested.update(_serology_from_tasks(gate_tasks or [], _MOTHER_SEROLOGY_RULES))
+        suggested.update(_serology_from_tasks(gate_tasks or [], _MOTHER_SEROLOGY_RULES_UC_MSC))
         suggested.setdefault("bacteria_test", "阴性")
         suggested.setdefault("result_judgment", "合格")
         if freeze:
@@ -338,7 +353,7 @@ def build_suggested(
         suggested.update(_FIXED_COMMON)
         suggested.update(_FIXED_UC_MSC)
     if sample_type_key in ("perinatal_hsc", "uc_msc"):
-        _fill_shared_mother(suggested, shared_mother_tasks)
+        _fill_shared_mother(suggested, shared_mother_tasks, sample_type_key=sample_type_key)
     return {key: value for key, value in suggested.items() if str(value).strip()}
 
 

backend/tests/test_market_presign_api.py

@@ -2564,10 +2564,13 @@ def test_web_presign_list_includes_ledger_fields():
     order.mother_name = '陈影'
     transfer = _transfer('ledger-transfer', order_id='ledger-1', pay_status='yjf')
     transfer.transfer_time = datetime(2026, 4, 2, 16, 49, 42)
+    pending = _transfer('ledger-pending', order_id='ledger-1', pay_status='dfj')
+    pending.transfer_time = datetime(2026, 4, 1, 10, 0, 0)
     db.add_all(
         [
             order,
             transfer,
+            pending,
             BizPresignOrderSampleType(
                 id='ledger-type',
                 presign_order_id='ledger-1',

backend/tests/test_production_planned_start_time_filter.py

@@ -0,0 +1,42 @@
+"""计划开始时间筛选：不内置工单/任务/步骤状态限制，交给外层组合条件。"""
+
+from sqlalchemy import create_engine
+from sqlalchemy.dialects import mysql
+from sqlalchemy.orm import sessionmaker
+
+from app.crud.production_work_order import apply_planned_start_time_step_filter
+from app.models.models import BizProductionWorkOrder
+
+
+def _compile_planned_start_sql() -> str:
+    eng = create_engine("sqlite://")
+    SessionLocal = sessionmaker(bind=eng)
+    db = SessionLocal()
+    try:
+        q = db.query(BizProductionWorkOrder).filter(BizProductionWorkOrder.del_flag == 0)
+        filtered = apply_planned_start_time_step_filter(
+            q,
+            tenant_no="zkxw",
+            work_order_id_column=BizProductionWorkOrder.id,
+            planned_start_time_start="2026-10-01",
+            planned_start_time_end="2026-12-31",
+        )
+        return str(
+            filtered.statement.compile(
+                dialect=mysql.dialect(), compile_kwargs={"literal_binds": True}
+            )
+        )
+    finally:
+        db.close()
+
+
+def test_planned_start_filter_keeps_date_bounds_without_status_hardcodes():
+    sql = _compile_planned_start_sql().lower()
+    assert "planned_start_time" in sql
+    assert "2026-10-01 00:00:00" in sql
+    assert "2026-12-31 23:59:59" in sql
+    # 不再在 EXISTS 内强制待配置/进行中或未完成步骤
+    assert "work_order_status in (" not in sql
+    assert "task_status in (" not in sql
+    assert "step_status !=" not in sql
+    assert "step_status <>" not in sql

backend/tests/test_protocol_v2_payment_mode_summary.py

@@ -1,10 +1,18 @@
 """协议列表可显式读取 V2 样本方案，其他费用摘要消费者保持原行为。"""
+from datetime import datetime
+from decimal import Decimal
+
 import pytest
 from sqlalchemy import create_engine
 from sqlalchemy.orm import sessionmaker
 
 from app.models.base import Base
-from app.models.models import BizProtocolSamplePayment
+from app.models.models import (
+    BizProtocolPaymentSchedule,
+    BizProtocolPaymentTransfer,
+    BizProtocolRefundRecord,
+    BizProtocolSamplePayment,
+)
 from app.services.qc_work_order_fee_summary import build_protocol_payment_summaries
 
 
@@ -31,3 +39,180 @@ def test_protocol_list_uses_active_tenant_v2_payment_modes(modes, expected, labe
         assert result['p1']['payModeLabel'] == label
         assert build_protocol_payment_summaries(db, ['p1'], 'tenant-a') == {}
     engine.dispose()
+
+
+def test_protocol_list_fills_received_from_v2_sample_transfers():
+    engine = create_engine('sqlite:///:memory:')
+    Base.metadata.create_all(engine)
+    with sessionmaker(bind=engine)() as db:
+        db.add_all(
+            [
+                BizProtocolSamplePayment(
+                    id='sp-dj',
+                    collection_protocol_id='p-v2',
+                    sample_code='S1',
+                    pay_mode='dj',
+                    contract_amount=Decimal('12800'),
+                    tenant_no='tenant-a',
+                    del_flag=0,
+                ),
+                BizProtocolSamplePayment(
+                    id='sp-fq',
+                    collection_protocol_id='p-v2',
+                    sample_code='S2',
+                    pay_mode='fq',
+                    contract_amount=Decimal('22880'),
+                    tenant_no='tenant-a',
+                    del_flag=0,
+                ),
+                BizProtocolPaymentSchedule(
+                    id='sch-dj-1',
+                    sample_payment_id='sp-dj',
+                    collection_protocol_id='p-v2',
+                    sample_code='S1',
+                    schedule_no=1,
+                    due_amount=Decimal('12800'),
+                    due_date='20260915',
+                    schedule_status='cleared',
+                    tenant_no='tenant-a',
+                    del_flag=0,
+                ),
+                BizProtocolPaymentSchedule(
+                    id='sch-fq-1',
+                    sample_payment_id='sp-fq',
+                    collection_protocol_id='p-v2',
+                    sample_code='S2',
+                    schedule_no=1,
+                    due_amount=Decimal('6480'),
+                    due_date='20260915',
+                    schedule_status='cleared',
+                    tenant_no='tenant-a',
+                    del_flag=0,
+                ),
+                BizProtocolPaymentSchedule(
+                    id='sch-fq-2',
+                    sample_payment_id='sp-fq',
+                    collection_protocol_id='p-v2',
+                    sample_code='S2',
+                    schedule_no=2,
+                    due_amount=Decimal('16400'),
+                    due_date='20261015',
+                    schedule_status='open',
+                    tenant_no='tenant-a',
+                    del_flag=0,
+                ),
+                BizProtocolPaymentTransfer(
+                    id='tr-dj',
+                    schedule_id='sch-dj-1',
+                    sample_payment_id='sp-dj',
+                    collection_protocol_id='p-v2',
+                    sample_code='S1',
+                    transfer_amount=Decimal('12800'),
+                    transfer_time=datetime(2026, 9, 15, 12, 0, 0),
+                    pay_status='yjf',
+                    tenant_no='tenant-a',
+                    del_flag=0,
+                ),
+                BizProtocolPaymentTransfer(
+                    id='tr-fq',
+                    schedule_id='sch-fq-1',
+                    sample_payment_id='sp-fq',
+                    collection_protocol_id='p-v2',
+                    sample_code='S2',
+                    transfer_amount=Decimal('6480'),
+                    transfer_time=datetime(2026, 9, 15, 11, 13, 1),
+                    pay_status='yjf',
+                    tenant_no='tenant-a',
+                    del_flag=0,
+                ),
+                BizProtocolPaymentTransfer(
+                    id='tr-pending',
+                    schedule_id='sch-fq-2',
+                    sample_payment_id='sp-fq',
+                    collection_protocol_id='p-v2',
+                    sample_code='S2',
+                    transfer_amount=None,
+                    transfer_time=None,
+                    pay_status='dfj',
+                    tenant_no='tenant-a',
+                    del_flag=0,
+                ),
+            ]
+        )
+        db.commit()
+        result = build_protocol_payment_summaries(
+            db, ['p-v2'], 'tenant-a', include_sample_payment_modes=True
+        )
+        summary = result['p-v2']
+        assert summary['payMode'] == 'djfq'
+        assert summary['contractAmount'] == 35680.0
+        assert summary['receivedAmount'] == 19280.0
+        assert summary['pendingAmount'] == 16400.0
+        details = summary['paymentDetails']
+        assert len(details) == 3
+        first = [d for d in details if d['installmentNo'] == 1]
+        assert sum(float(d['dueAmount'] or 0) for d in first) == 19280.0
+        assert sum(float(d['transferAmount'] or 0) for d in first) == 19280.0
+        # 未开启 include 时不补齐 V2 已收（质检费用摘要保持原语义）
+        plain = build_protocol_payment_summaries(db, ['p-v2'], 'tenant-a')
+        assert plain['p-v2'].get('receivedAmount') is None
+        assert plain['p-v2'].get('paymentDetails') == []
+    engine.dispose()
+
+
+def test_protocol_list_fills_refund_amount_from_v2_refund_records():
+    engine = create_engine('sqlite:///:memory:')
+    Base.metadata.create_all(engine)
+    with sessionmaker(bind=engine)() as db:
+        db.add_all(
+            [
+                BizProtocolSamplePayment(
+                    id='sp-void',
+                    collection_protocol_id='p-void',
+                    sample_code='S9',
+                    pay_mode='dj',
+                    contract_amount=Decimal('5000'),
+                    tenant_no='tenant-a',
+                    del_flag=0,
+                ),
+                BizProtocolPaymentSchedule(
+                    id='sch-void',
+                    sample_payment_id='sp-void',
+                    collection_protocol_id='p-void',
+                    sample_code='S9',
+                    schedule_no=1,
+                    due_amount=Decimal('5000'),
+                    due_date='20260918',
+                    schedule_status='cleared',
+                    tenant_no='tenant-a',
+                    del_flag=0,
+                ),
+                BizProtocolPaymentTransfer(
+                    id='tr-void',
+                    schedule_id='sch-void',
+                    sample_payment_id='sp-void',
+                    collection_protocol_id='p-void',
+                    sample_code='S9',
+                    transfer_amount=Decimal('5000'),
+                    transfer_time=datetime(2026, 9, 18, 14, 55, 4),
+                    pay_status='yjf',
+                    tenant_no='tenant-a',
+                    del_flag=0,
+                ),
+                BizProtocolRefundRecord(
+                    id='rf-void',
+                    collection_protocol_id='p-void',
+                    refund_amount=Decimal('5000'),
+                    refund_time=datetime(2026, 9, 19, 10, 0, 0),
+                    tenant_no='tenant-a',
+                    del_flag=0,
+                ),
+            ]
+        )
+        db.commit()
+        summary = build_protocol_payment_summaries(
+            db, ['p-void'], 'tenant-a', include_sample_payment_modes=True
+        )['p-void']
+        assert summary['receivedAmount'] == 5000.0
+        assert summary['refundAmount'] == 5000.0
+    engine.dispose()

backend/tests/test_sample_storage_cert_qc.py

@@ -8,8 +8,10 @@ from app.services.sample_storage_cert_qc import (
     SAMPLE_TYPE_KEY_PERINATAL_HSC,
     SAMPLE_TYPE_KEY_UC_MSC,
     empty_detail,
+    merge_payload_with_acl,
     normalize_payload,
     resolve_sample_type_key,
+    sanitize_payload_for_type,
     supports_storage_cert_qc,
 )
 from app.services.sample_storage_cert_qc_prefill import (
@@ -51,6 +53,34 @@ class TestNormalizePayload(unittest.TestCase):
         self.assertNotIn(1, out)
 
 
+class TestSanitizePayloadForType(unittest.TestCase):
+    def test_uc_msc_drops_mother_nucleic_acids(self):
+        out = sanitize_payload_for_type(
+            {
+                "mother_hbsag": "阴性",
+                "mother_hbv_dna": "阴性",
+                "mother_hcv_rna": "阳性",
+                "mother_hiv1_rna": "阴性",
+                "mother_cmv_igm": "阴性",
+            },
+            SAMPLE_TYPE_KEY_UC_MSC,
+        )
+        self.assertEqual(out["mother_hbsag"], "阴性")
+        self.assertEqual(out["mother_cmv_igm"], "阴性")
+        self.assertNotIn("mother_hbv_dna", out)
+        self.assertNotIn("mother_hcv_rna", out)
+        self.assertNotIn("mother_hiv1_rna", out)
+
+    def test_perinatal_keeps_mother_nucleic_acids(self):
+        payload = {
+            "mother_hbv_dna": "阴性",
+            "mother_hcv_rna": "阴性",
+            "mother_hiv1_rna": "阴性",
+        }
+        out = sanitize_payload_for_type(payload, SAMPLE_TYPE_KEY_PERINATAL_HSC)
+        self.assertEqual(out, payload)
+
+
 class TestEmptyDetail(unittest.TestCase):
     def test_shape(self):
         d = empty_detail(
@@ -302,13 +332,13 @@ class TestStorageCertPrefill(unittest.TestCase):
         ]
         suggested = build_suggested(sample_type_key="uc_msc", shared_mother_tasks=shared)
         self.assertEqual(suggested["mother_hbsag"], "阴性")
-        self.assertEqual(suggested["mother_hbv_dna"], "阴性")
+        self.assertNotIn("mother_hbv_dna", suggested)
         self.assertEqual(suggested["mother_anti_hcv"], "阴性")
-        self.assertEqual(suggested["mother_hcv_rna"], "阴性")
+        self.assertNotIn("mother_hcv_rna", suggested)
         self.assertEqual(suggested["mother_anti_tp"], "阴性")
         self.assertEqual(suggested["mother_cmv_igm"], "阴性")
         self.assertEqual(suggested["mother_anti_hiv"], "阴性")
-        self.assertEqual(suggested["mother_hiv1_rna"], "阴性")
+        self.assertNotIn("mother_hiv1_rna", suggested)
         self.assertNotIn("hbsag", suggested)
 
     def test_own_mother_blood_wins_and_shared_only_fills_gaps(self):
@@ -339,5 +369,35 @@ class TestStorageCertPrefill(unittest.TestCase):
         self.assertNotIn("hbsag", merged)
 
 
+class TestMergePayloadWithAcl(unittest.TestCase):
+    def test_merges_only_editable_keys(self):
+        merged = merge_payload_with_acl(
+            existing={"receive_time": "a", "bacteria_test": "阴性"},
+            incoming={"receive_time": "b", "bacteria_test": "阴性"},
+            editable_keys=["receive_time"],
+            sample_type_key=SAMPLE_TYPE_KEY_PERINATAL_HSC,
+        )
+        self.assertEqual(merged["receive_time"], "b")
+        self.assertEqual(merged["bacteria_test"], "阴性")
+
+    def test_rejects_unauthorized_change(self):
+        with self.assertRaises(PermissionError):
+            merge_payload_with_acl(
+                existing={"bacteria_test": "阴性"},
+                incoming={"bacteria_test": "阳性"},
+                editable_keys=["receive_time"],
+                sample_type_key=SAMPLE_TYPE_KEY_PERINATAL_HSC,
+            )
+
+    def test_rejects_empty_editable_keys(self):
+        with self.assertRaises(PermissionError):
+            merge_payload_with_acl(
+                existing={},
+                incoming={"receive_time": "x"},
+                editable_keys=[],
+                sample_type_key=SAMPLE_TYPE_KEY_PERINATAL_HSC,
+            )
+
+
 if __name__ == "__main__":
     unittest.main()

backend/tests/test_sample_storage_cert_qc_acl.py

@@ -0,0 +1,101 @@
+"""储存证质检字段 ACL：合法字段与 scope。"""
+import unittest
+from unittest.mock import MagicMock
+
+from sqlalchemy.dialects import mysql
+
+from app.crud import sample_storage_cert_qc_acl as acl_svc
+from app.models.models import BizStorageCertQcAcl, BizStorageCertQcAclUser, SysUser
+from app.services.sample_storage_cert_qc import (
+    ACL_SCOPE_PRODUCTION,
+    ACL_SCOPE_QC,
+    ALL_STORAGE_CERT_QC_FIELD_KEYS,
+    SAMPLE_TYPE_KEY_UC_MSC,
+    dumps_field_keys,
+    legal_field_keys_for_type,
+    loads_field_keys,
+)
+
+
+class TestAclFieldKeys(unittest.TestCase):
+    def test_uc_msc_excludes_mother_nucleic_acids(self):
+        keys = legal_field_keys_for_type(SAMPLE_TYPE_KEY_UC_MSC)
+        self.assertNotIn("mother_hbv_dna", keys)
+        self.assertIn("mother_hbsag", keys)
+
+    def test_roundtrip_field_keys(self):
+        raw = dumps_field_keys(["receive_time", "bacteria_test", "receive_time", ""])
+        self.assertEqual(loads_field_keys(raw), ["bacteria_test", "receive_time"])
+
+    def test_all_keys_cover_common_fields(self):
+        self.assertIn("receive_time", ALL_STORAGE_CERT_QC_FIELD_KEYS)
+        self.assertIn("mother_anti_hiv", ALL_STORAGE_CERT_QC_FIELD_KEYS)
+
+    def test_scopes(self):
+        self.assertEqual(ACL_SCOPE_QC, "qc")
+        self.assertEqual(ACL_SCOPE_PRODUCTION, "production")
+
+
+class TestAclUserJoinCollation(unittest.TestCase):
+    def test_detail_user_join_uses_unicode_collate(self):
+        """JOIN sys_user 时统一 utf8mb4_unicode_ci，避免 1267 mix of collations。"""
+        acl = MagicMock()
+        acl.id = "acl-1"
+        acl.field_keys = "[]"
+        acl.configured_flag = "1"
+
+        captured = {}
+
+        class _Query:
+            def __init__(self, *args, **kwargs):
+                pass
+
+            def filter(self, *args, **kwargs):
+                captured.setdefault("filters", []).extend(args)
+                return self
+
+            def first(self):
+                return acl
+
+            def outerjoin(self, *args, **kwargs):
+                captured["join_on"] = args[1] if len(args) > 1 else None
+                return self
+
+            def order_by(self, *args, **kwargs):
+                return self
+
+            def all(self):
+                return []
+
+        db = MagicMock()
+        db.query.side_effect = lambda *args, **kwargs: _Query()
+
+        detail = acl_svc.get_acl_detail(db, "t1", "qc")
+        self.assertEqual(detail["scope"], "qc")
+        join_on = captured.get("join_on")
+        self.assertIsNotNone(join_on)
+        sql = str(
+            join_on.compile(dialect=mysql.dialect(), compile_kwargs={"literal_binds": True})
+        ).lower()
+        self.assertIn("utf8mb4_unicode_ci", sql)
+        filter_sql = " ".join(
+            str(f.compile(dialect=mysql.dialect(), compile_kwargs={"literal_binds": True})).lower()
+            for f in captured.get("filters", [])
+        )
+        self.assertIn("utf8mb4_unicode_ci", filter_sql)
+        self.assertIn("sys_user", SysUser.__tablename__)
+        self.assertIn("biz_storage_cert_qc_acl_user", BizStorageCertQcAclUser.__tablename__)
+        self.assertEqual(BizStorageCertQcAcl.__tablename__, "biz_storage_cert_qc_acl")
+
+    def test_eq_unicode_literal_only_collates_column(self):
+        from app.core.db_collation import eq_unicode
+
+        expr = eq_unicode(BizStorageCertQcAcl.tenant_no, "t1")
+        sql = str(
+            expr.compile(dialect=mysql.dialect(), compile_kwargs={"literal_binds": True})
+        ).lower()
+        self.assertIn("utf8mb4_unicode_ci", sql)
+        self.assertEqual(sql.count("utf8mb4_unicode_ci"), 1)
+
+if __name__ == "__main__":
+    unittest.main()

docs/agents/README.md

@@ -60,6 +60,13 @@ Agent 需要你做决定时，会在当前回复里直接写出「待你确认
 
 完整安装提供 `notify-question` 命令，由 Agent 在提问后调用，不是宿主自动弹窗钩子。当前支持用户 macOS 本机；其他系统或远程执行缺少本地播放条件时回退文字提醒，不代表你已听到。安装、更新、普通进度和结束答复不播放。细则见安装目录 `references/question-notification.md`。
 
+### 在 Cursor 里听到提示音却看不到题时
+
+- 提示音在整机播放，**不会自动跳到对应聊天**；请到正在跑 Agent 的会话里搜索「待你确认」。
+- 输入框上方的 **Queued / Start Multitasking** 是你排队的后续消息，**不是**确认清单。
+- Cursor 会先跑工具再刷出最终正文，声音可能比清单早响一两秒；清单应出现在该轮助手正文开头。多会话并行时，切换其他进行中会话再搜一次。
+- 工程内 Agent 适配约定见 [Cursor 确认可见性](cursor-question-visibility.md)。
+
 ## 日常开发怎么提需求
 
 | 场景 | 可以直接发送的示例 |

docs/agents/cursor-question-visibility.md

@@ -0,0 +1,33 @@
+# Cursor 宿主：确认问题可见性
+
+个人开发体系要求：先在用户可见回复写出「待你确认」，再播放本机提示音。Cursor Agent 的执行顺序与此不完全同构，本文件是工程内的 Cursor 适配约定；与安装目录 `references/planning.md`、`references/question-notification.md` 并用，冲突时以「用户必须先看见清单」为准。
+
+## Cursor 执行顺序
+
+1. 同轮内的**工具调用先执行**，最终助手正文后出现。
+2. `notify-question`（`afplay`）若作为工具调用，提示音可能比「待你确认」正文早数秒响起。
+3. 提示音在**整机**播放，不绑定当前聚焦的聊天标签；多会话并行时，声音来源会话可能不是眼前这个。
+4. 输入框上方的 **Queued / Start Multitasking** 是用户排队的后续消息，**不是** Agent 确认清单。
+
+## Agent 必须遵守
+
+发问当轮：
+
+1. **先写清单**：该轮最终用户可见回复必须以「待你确认」开头（或紧接一句定位后立刻出现该标题），按问题展示规则写全题、推荐、理由与未回复处理。
+2. **同轮停手**：写出清单并（如需）播放提示音后，本轮不得再调用编辑、浏览器、继续实现等工具；依赖答复的工作等下一轮。允许的独立只读工作若与本题无关，应在发问**之前**做完，或放到用户答复之后。
+3. **提示音时机**：需要播放时，`notify-question` 必须是本轮**最后一次**工具调用，且本轮最终正文就是确认清单。禁止在仍计划继续工具批处理时提前播放。
+4. **正文定位**：清单首段或标题下用一句说明「请在本会话回复；提示音不念题目，底部 Queued 不是确认入口。」
+5. **无清单不播放**：最终正文没有「待你确认」时，不得调用 `notify-question`。
+6. **原生卡片**：若当前 Cursor 会话提供宿主提问/确认卡片，可与清单并用，卡片内容须与「待你确认」一致；不得只用卡片、省略正文清单。
+
+## 用户侧核对
+
+听到「有问题待确认」时：
+
+1. 看**正在或刚结束工具步骤的那个聊天**（不必先看 Queued）。
+2. 在该会话搜索或上翻 **「待你确认」**；清单在工具时间线收折块之外的助手正文里。
+3. 若多聊天并行，切换到其他进行中会话再搜同一标题。
+
+## 静音与一分钟策略
+
+声音开关、一分钟默认选择仍按安装目录规则；本文件不改变其语义，只约束 Cursor 下的展示与播音顺序。

docs/sql/migrations/2026-11-05-protocol-operation-log.sql

@@ -1,6 +1,10 @@
 -- Issue #24：协议单操作过程日志（before / action / after）
 -- MySQL 5.7；可重复执行（CREATE IF NOT EXISTS）。上线前须备份并在目标副本验证。
 -- DDL 隐式提交；该脚本不作为自动应用启动步骤。
+--
+-- 注意：若目标库已存在同名「采集协议单操作日志」旧表（含 collection_protocol_id /
+-- operation_code 等列），本脚本会因 IF NOT EXISTS 直接跳过，不会纠偏。
+-- 生产纠偏请改用：2026-11-09-protocol-operation-log-rebuild.sql
 
 CREATE TABLE IF NOT EXISTS biz_protocol_operation_log (
   id VARCHAR(64) NOT NULL,

docs/sql/migrations/2026-11-09-protocol-operation-log-rebuild.sql

@@ -0,0 +1,119 @@
+-- =============================================================================
+-- 协议操作日志：兼容生产旧表同名冲突，重建为 Issue #24 模型
+-- MySQL 5.7；可重复执行。上线前须备份，并在目标副本验证。
+--
+-- 背景：
+--   生产曾有「采集协议单操作日志」同名表（collection_protocol_id / operation_*），
+--   与当前代码（biz_type / before_json / after_json）不兼容。
+--   旧脚本 2026-11-05-protocol-operation-log.sql 使用 CREATE IF NOT EXISTS，
+--   遇到旧表会直接跳过，无法纠偏。本脚本用于生产纠偏与新环境兜底。
+--
+-- 行为：
+--   1) 已是新模型（有 biz_type）→ 跳过结构变更
+--   2) 旧模型且 0 行 → DROP 后按新模型 CREATE
+--   3) 旧模型且有数据 → RENAME 为 biz_protocol_operation_log_legacy_20261109 再 CREATE
+--   4) 表不存在 → 直接 CREATE
+-- =============================================================================
+
+SET @db := DATABASE();
+
+SET @table_exists := (
+  SELECT COUNT(*) FROM information_schema.tables
+  WHERE table_schema = @db AND table_name = 'biz_protocol_operation_log'
+);
+
+SET @has_legacy_col := (
+  SELECT COUNT(*) FROM information_schema.columns
+  WHERE table_schema = @db
+    AND table_name = 'biz_protocol_operation_log'
+    AND column_name = 'collection_protocol_id'
+);
+
+SET @has_new_col := (
+  SELECT COUNT(*) FROM information_schema.columns
+  WHERE table_schema = @db
+    AND table_name = 'biz_protocol_operation_log'
+    AND column_name = 'biz_type'
+);
+
+SET @is_legacy := IF(@table_exists > 0 AND @has_legacy_col > 0 AND @has_new_col = 0, 1, 0);
+
+SET @legacy_rows := 0;
+SET @cnt_sql := IF(
+  @is_legacy = 1,
+  'SET @legacy_rows = (SELECT COUNT(*) FROM `biz_protocol_operation_log`)',
+  'SET @legacy_rows = 0'
+);
+PREPARE pol_stmt FROM @cnt_sql;
+EXECUTE pol_stmt;
+DEALLOCATE PREPARE pol_stmt;
+
+-- 空旧表：直接删除
+SET @drop_sql := IF(
+  @is_legacy = 1 AND @legacy_rows = 0,
+  'DROP TABLE `biz_protocol_operation_log`',
+  'SELECT ''skip drop empty legacy biz_protocol_operation_log'' AS migration_status'
+);
+PREPARE pol_stmt FROM @drop_sql;
+EXECUTE pol_stmt;
+DEALLOCATE PREPARE pol_stmt;
+
+-- 有数据的旧表：改名保留，避免丢历史（当前生产为 0 行，通常不会走到这里）
+SET @legacy_backup_exists := (
+  SELECT COUNT(*) FROM information_schema.tables
+  WHERE table_schema = @db AND table_name = 'biz_protocol_operation_log_legacy_20261109'
+);
+SET @rename_sql := IF(
+  @is_legacy = 1 AND @legacy_rows > 0 AND @legacy_backup_exists = 0,
+  'RENAME TABLE `biz_protocol_operation_log` TO `biz_protocol_operation_log_legacy_20261109`',
+  IF(
+    @is_legacy = 1 AND @legacy_rows > 0 AND @legacy_backup_exists > 0,
+    'SELECT ''ERROR: legacy backup biz_protocol_operation_log_legacy_20261109 already exists; resolve manually'' AS migration_status',
+    'SELECT ''skip rename legacy biz_protocol_operation_log'' AS migration_status'
+  )
+);
+PREPARE pol_stmt FROM @rename_sql;
+EXECUTE pol_stmt;
+DEALLOCATE PREPARE pol_stmt;
+
+-- 新模型建表（纠偏后或全新环境）
+CREATE TABLE IF NOT EXISTS `biz_protocol_operation_log` (
+  `id` VARCHAR(64) NOT NULL COMMENT '主键ID',
+  `biz_type` VARCHAR(32) NOT NULL COMMENT '业务类型 cell_storage/research_donation',
+  `biz_id` VARCHAR(64) NOT NULL COMMENT '协议单或捐赠单ID',
+  `protocol_no` VARCHAR(64) NULL COMMENT '协议/捐赠编号快照',
+  `action` VARCHAR(32) NOT NULL COMMENT '动作 create/update/delete/void/activate/expire/to_research/to_storage/audit',
+  `client_channel` VARCHAR(16) NOT NULL DEFAULT 'web' COMMENT '来源端 web/mini',
+  `before_json` MEDIUMTEXT NULL COMMENT '操作前协议信息JSON',
+  `after_json` MEDIUMTEXT NULL COMMENT '操作后协议信息JSON',
+  `operator_user_id` VARCHAR(64) NULL COMMENT '操作人用户ID',
+  `operator_user_name` VARCHAR(64) NULL COMMENT '操作人姓名快照',
+  `operate_time` DATETIME NOT NULL COMMENT '业务操作时间',
+  `tenant_no` VARCHAR(64) NOT NULL COMMENT '租户编号',
+  `order_num` INT NULL COMMENT '排序号',
+  `remark` VARCHAR(512) NULL COMMENT '备注',
+  `create_by` VARCHAR(64) NULL COMMENT '创建人id',
+  `create_dept_id` VARCHAR(64) NOT NULL DEFAULT '' COMMENT '创建人部门ID',
+  `create_time` DATETIME NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT '创建时间',
+  `update_by` VARCHAR(64) NULL COMMENT '更新人id',
+  `update_time` DATETIME NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP COMMENT '更新时间',
+  `del_flag` SMALLINT NOT NULL DEFAULT 0 COMMENT '删除标记',
+  PRIMARY KEY (`id`),
+  KEY `ix_pol_biz` (`tenant_no`, `biz_type`, `biz_id`, `del_flag`),
+  KEY `ix_pol_time` (`tenant_no`, `operate_time`)
+) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_unicode_ci COMMENT='协议单操作过程日志';
+
+-- 验收：新模型关键列应存在
+SELECT
+  COLUMN_NAME,
+  COLUMN_TYPE,
+  IS_NULLABLE,
+  COLUMN_COMMENT
+FROM information_schema.columns
+WHERE table_schema = DATABASE()
+  AND table_name = 'biz_protocol_operation_log'
+  AND COLUMN_NAME IN (
+    'biz_type', 'biz_id', 'action', 'before_json', 'after_json',
+    'client_channel', 'operate_time', 'collection_protocol_id', 'operation_code'
+  )
+ORDER BY ORDINAL_POSITION;

docs/sql/migrations/2026-11-11-storage-cert-qc-acl-collation-fix.sql

@@ -0,0 +1,14 @@
+-- Issue #97：将储存证质检 ACL 表 collation 对齐库默认 utf8mb4_unicode_ci。
+-- 修复与 sys_user 等表 JOIN 时 Illegal mix of collations。可重复执行。
+
+ALTER TABLE biz_storage_cert_qc_acl
+  CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;
+
+ALTER TABLE biz_storage_cert_qc_acl_user
+  CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;
+
+SELECT table_name, table_collation
+FROM information_schema.tables
+WHERE table_schema = DATABASE()
+  AND table_name IN ('biz_storage_cert_qc_acl', 'biz_storage_cert_qc_acl_user')
+ORDER BY table_name;

docs/sql/migrations/2026-11-11-storage-cert-qc-field-acl.sql

@@ -0,0 +1,108 @@
+-- Issue #93：储存证质检信息字段级 ACL（质检/生产）。MySQL 5.7，可重复执行。
+-- 菜单按钮「储存证质检字段权限配置」控制弹窗 footer 的「质检权限」「生产权限」入口；
+-- 本脚本会将该按钮授权给当前租户下全部有效角色。
+
+CREATE TABLE IF NOT EXISTS biz_storage_cert_qc_acl (
+  id VARCHAR(64) NOT NULL,
+  scope VARCHAR(32) NOT NULL COMMENT 'qc|production',
+  field_keys TEXT NOT NULL COMMENT '可编辑字段 key JSON 数组',
+  configured_flag CHAR(1) NOT NULL DEFAULT '0' COMMENT '是否已正式配置 0否1是',
+  tenant_no VARCHAR(64) NOT NULL,
+  order_num INT NULL,
+  remark VARCHAR(512) NULL,
+  create_by VARCHAR(64) NULL,
+  create_dept_id VARCHAR(64) NOT NULL DEFAULT '',
+  create_time DATETIME NOT NULL DEFAULT CURRENT_TIMESTAMP,
+  update_by VARCHAR(64) NULL,
+  update_time DATETIME NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
+  del_flag SMALLINT NOT NULL DEFAULT 0,
+  PRIMARY KEY (id),
+  KEY ix_tenant_scope (tenant_no, scope, del_flag)
+) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_unicode_ci;
+
+CREATE TABLE IF NOT EXISTS biz_storage_cert_qc_acl_user (
+  id VARCHAR(64) NOT NULL,
+  acl_id VARCHAR(64) NOT NULL,
+  user_id VARCHAR(64) NOT NULL,
+  tenant_no VARCHAR(64) NOT NULL,
+  order_num INT NULL,
+  remark VARCHAR(512) NULL,
+  create_by VARCHAR(64) NULL,
+  create_dept_id VARCHAR(64) NOT NULL DEFAULT '',
+  create_time DATETIME NOT NULL DEFAULT CURRENT_TIMESTAMP,
+  update_by VARCHAR(64) NULL,
+  update_time DATETIME NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
+  del_flag SMALLINT NOT NULL DEFAULT 0,
+  PRIMARY KEY (id),
+  KEY ix_tenant_acl (tenant_no, acl_id, del_flag),
+  KEY ix_tenant_user (tenant_no, user_id, del_flag)
+) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_unicode_ci;
+
+INSERT INTO sys_menu (
+    id, menu_name, parent_id, menu_type, path, component, perms,
+    is_frame, visible, status, tenant_no, order_num, remark,
+    create_by, create_dept_id, create_time, update_by, update_time, del_flag
+)
+SELECT
+    INSERT(INSERT(MD5(CONCAT('storage-cert-qc-acl:', parent.tenant_no, ':', parent.id)),
+                  13, 1, '3'), 17, 1, '8'),
+    '储存证质检字段权限配置', parent.id, 'F', '', NULL,
+    'cell-storage:sample-info:storage-cert-qc-acl', 1, '1', '1', parent.tenant_no, 95,
+    '控制储存证质检弹窗中质检/生产字段与人员 ACL 配置入口',
+    'migration', '', NOW(), 'migration', NOW(), 0
+FROM sys_menu AS parent
+WHERE parent.del_flag = 0 AND parent.status = '1'
+  AND parent.perms = 'cell-storage:sample-info:list'
+  AND NOT EXISTS (
+      SELECT 1 FROM sys_menu AS existing
+      WHERE existing.parent_id = parent.id
+        AND existing.tenant_no = parent.tenant_no
+        AND existing.perms = 'cell-storage:sample-info:storage-cert-qc-acl'
+        AND existing.del_flag = 0
+  );
+
+-- 给所有有效角色授予「质检权限 / 生产权限」配置按钮（同一菜单码）
+INSERT INTO sys_role_menu (
+    id, role_id, menu_id, tenant_no, order_num, remark,
+    create_by, create_dept_id, create_time, update_by, update_time, del_flag
+)
+SELECT
+    INSERT(INSERT(MD5(CONCAT('storage-cert-qc-acl-role:', r.tenant_no, ':', r.id, ':', m.id)),
+                  13, 1, '3'), 17, 1, '8'),
+    r.id,
+    m.id,
+    r.tenant_no,
+    NULL,
+    'migration: grant storage-cert-qc-acl to all roles',
+    'migration',
+    '',
+    NOW(),
+    'migration',
+    NOW(),
+    0
+FROM sys_role AS r
+JOIN sys_menu AS m
+  ON m.tenant_no = r.tenant_no
+ AND m.perms = 'cell-storage:sample-info:storage-cert-qc-acl'
+ AND m.del_flag = 0
+ AND m.status = '1'
+WHERE r.del_flag = 0
+  AND NOT EXISTS (
+      SELECT 1 FROM sys_role_menu AS existing
+      WHERE existing.role_id = r.id
+        AND existing.menu_id = m.id
+        AND existing.tenant_no = r.tenant_no
+        AND existing.del_flag = 0
+  );
+
+SELECT tenant_no, parent_id, id, menu_name, perms, status
+FROM sys_menu
+WHERE perms = 'cell-storage:sample-info:storage-cert-qc-acl' AND del_flag = 0;
+
+SELECT r.tenant_no, r.role_name, m.perms, rm.id AS role_menu_id
+FROM sys_role_menu AS rm
+JOIN sys_role AS r ON r.id = rm.role_id AND r.tenant_no = rm.tenant_no AND r.del_flag = 0
+JOIN sys_menu AS m ON m.id = rm.menu_id AND m.tenant_no = rm.tenant_no AND m.del_flag = 0
+WHERE m.perms = 'cell-storage:sample-info:storage-cert-qc-acl'
+  AND rm.del_flag = 0
+ORDER BY r.tenant_no, r.role_name;

mobile-h5/manifest.json

@@ -49,11 +49,11 @@
     /* 快应用特有相关 */
     "quickapp" : {},
     /* 小程序特有相关 */
-    /* 当前：生产 AppID；切测试时把 appid 改为下方测试值 */
+    /* 当前：测试 AppID；切生产时把 appid 改为下方生产值 */
     /* 生产 AppID：wx2b139581f4c855e4 */
     /* 测试 AppID：wxa261ad85f2c99b26 */
     "mp-weixin" : {
-        "appid" : "wx2b139581f4c855e4",
+        "appid" : "wxa261ad85f2c99b26",
         "setting" : {
             "urlCheck" : false,
             "es6" : true

mobile-h5/utils/config.js

@@ -6,7 +6,7 @@
  *
  * 微信公众平台须为对应环境配置 request / 业务域名（HTTPS）
  */
-export const APP_ENV = 'prod' // 'local' | 'test' | 'prod'
+export const APP_ENV = 'local' // 'local' | 'test' | 'prod'
 
 const ENV_PRESETS = {
   local: {

openspec/changes/storage-cert-qc-field-acl/.openspec.yaml

@@ -0,0 +1,2 @@
+schema: spec-driven
+created: 2026-11-11

openspec/changes/storage-cert-qc-field-acl/design.md

@@ -0,0 +1,47 @@
+## Context
+
+储存证质检信息由 `biz_sample_storage_cert_qc.payload` JSON 保存，Web 共用 `storage-cert-qc-dialog`，API 以菜单码控制读写且保存为整单覆盖。业务现要求按「质检 / 生产」拆分字段编辑权，并可由管理员配置人员。
+
+已确认：方案 A（租户级配置 + 按人授权）；配置入口独立菜单码；未配置前兼容旧写权限；同人字段并集；修改端为 web-admin + backend。
+
+## Goals / Non-Goals
+
+**Goals:**
+
+- 租户可配置质检、生产两套「字段 + 人员」ACL
+- 前端按字段只读/可写；后端 merge 强制执行
+- 三处入口行为一致；配置 UI 符合 Fresh Mint 弹窗规范
+
+**Non-Goals:**
+
+- 不按样本、不按工单单独配置 ACL
+- 不引入角色绑定作为本期主路径（人员勾选）
+- 不改造 mobile-h5 / mobile-oa-h5
+- 不改变 payload 字段语义与预填逻辑（仅限制谁能改）
+
+## Decisions
+
+1. **存储**：主表 `biz_storage_cert_qc_acl`（`tenant_no`+`scope` 唯一，`field_keys` JSON，`configured_flag`）+ 子表 `biz_storage_cert_qc_acl_user`（`acl_id`+`user_id`，软删同步）。相对单 JSON 大包，子表便于人员校验与审计扩展。
+2. **权限解析**：用户可编辑字段 = 其所属各已配置 scope 的 field_keys 并集；严格模式在「任一 scope 的 configured_flag=1」时启用；否则有原 WRITE_MENUS 即可编辑全部合法字段。
+3. **写路径**：**BREAKING 行为**：`PUT` 从整单覆盖改为服务端 merge——仅更新 `editableFieldKeys` 内键；无任何可写字段拒绝保存；提交中含无权键且值相对库内有变化则 403。
+4. **配置权限**：独立菜单码（建议 `cell-storage:sample-info:storage-cert-qc-acl`）；与业务填写菜单分离。按钮仅在 `canConfigureAcl=true` 时展示。
+5. **字段候选**：前后端共用类型字段清单（与 `STORAGE_CERT_QC_GROUPS` / 后端 type keys 对齐）；配置 UI 展示两样本类型字段并集，非法 key 拒绝保存。
+6. **UI**：主弹窗 footer 左侧配置按钮、右侧取消/确定；配置子弹两个 Tab（字段勾选 / 人员多选）。先 Figma 确认再编码。
+
+## Risks / Trade-offs
+
+- [未配置→已配置切换瞬间全员变严] → 上线说明；兼容期默认未配置仍可写；配置保存前可预览影响（可选，本期不做强制）。
+- [人员名单维护成本] → 接受方案 A；后续可加角色扩展，不阻塞本期。
+- [整单覆盖客户端旧代码] → 后端 merge 兼容旧客户端：无权字段被忽略或在变更时 403；推荐 403 以便发现错误集成。
+- [超级管理员] → 不默认绕过 ACL；仅配置菜单控制谁能改 ACL。若需超管旁路，另开需求。
+
+## Migration Plan
+
+1. 执行 SQL 建表；部署后端（读接口先返回兼容态 editableFieldKeys=全部或空+aclStrict=false）。
+2. 部署前端（无配置权限时 UI 与现网接近）。
+3. 管理员配置质检/生产后该租户进入严格模式。
+4. 回滚：保留表数据；回退代码后配置表闲置；严格模式逻辑随代码回退消失。
+
+## Open Questions
+
+- 无（关键项已在对话确认：租户级、独立配置菜单、兼容期、字段并集、先 Figma）。

openspec/changes/storage-cert-qc-field-acl/proposal.md

@@ -0,0 +1,28 @@
+## Why
+
+「填写储存证质检信息」弹窗目前只要具备菜单写权限即可改全部字段，无法按质检 / 生产职责拆分。业务需要：质检与生产各自配置可编辑字段与人员，范围外用户仅可查看，且服务端必须强制校验。
+
+## What Changes
+
+- 新增租户级储存证质检字段 ACL：两个 scope（`qc` / `production`），各自保存可编辑字段列表与可编辑人员。
+- 详情接口返回当前用户 `editableFieldKeys` 等权限上下文；保存改为服务端按权限 merge，拒绝无权字段篡改。
+- 主弹窗 footer 左侧增加「质检权限」「生产权限」入口（仅配置权限可见）；配置子弹含「勾选字段」「配置人员」两个 Tab。
+- 未对任一 scope 保存过配置时，兼容现有菜单写权限（可改全部）；任一 scope 首次配置后该租户进入严格 ACL。
+- **不改**小程序 / mobile-oa-h5；三处 Web 入口（客户服务、质检工单、生产工单）共用同一弹窗组件一并生效。
+
+## Capabilities
+
+### New Capabilities
+
+- `storage-cert-qc-field-acl`: 储存证质检信息字段级编辑权限（配置、解析、读写强制）
+
+### Modified Capabilities
+
+- （无；`openspec/specs/` 尚未建立长期基线中的对应能力）
+
+## Impact
+
+- **backend**：新表与 CRUD/API；`sample_storage_cert_qc` 读/写路径；菜单码与鉴权
+- **web-admin**：`storage-cert-qc-dialog`、ACL 配置子弹、API 客户端
+- **docs/sql**：结构迁移脚本
+- **权限**：租户隔离；配置入口独立菜单码；写入不信任客户端字段权限声明

openspec/changes/storage-cert-qc-field-acl/specs/storage-cert-qc-field-acl/spec.md

@@ -0,0 +1,76 @@
+## ADDED Requirements
+
+### Requirement: 租户级质检与生产字段 ACL 配置
+
+系统 SHALL 按租户维护储存证质检信息的两套编辑权限配置，scope 分别为 `qc`（质检）与 `production`（生产）。每套配置 SHALL 包含可编辑字段 key 列表与可编辑用户列表。字段 key MUST 属于该业务已定义的合法 payload 键集合。
+
+#### Scenario: 管理员保存质检权限
+
+- **WHEN** 具备 ACL 配置菜单权限的用户保存 scope=`qc` 的字段列表与人员列表
+- **THEN** 系统持久化该租户的质检 ACL，并将该 scope 标记为已配置
+
+#### Scenario: 非法字段被拒绝
+
+- **WHEN** 配置请求包含不在合法 payload 键集合中的 field key
+- **THEN** 系统拒绝保存并返回错误，不部分写入
+
+### Requirement: 按当前用户解析可编辑字段
+
+系统在返回储存证质检详情时 SHALL 附带当前用户可编辑字段集合。可编辑字段 MUST 为用户所属各 scope 字段列表的并集。未出现在任一 ACL 人员名单中的用户，在严格模式下 MUST 得到空的可编辑字段集合（仍可只读查看详情）。
+
+#### Scenario: 同属两 scope 取并集
+
+- **WHEN** 用户同时在质检与生产人员名单中，且两 scope 勾选了不同字段
+- **THEN** 详情中的可编辑字段为两 scope 字段的并集
+
+#### Scenario: 未授权用户只读
+
+- **WHEN** 租户已进入严格 ACL，且当前用户不在任一 scope 人员名单中
+- **THEN** 可编辑字段为空，用户可查看已有数据但不能修改
+
+### Requirement: 未配置前兼容菜单写权限
+
+当租户的质检与生产 scope 均未被标记为已配置时，系统 SHALL 保持兼容行为：只要用户具备既有储存证质检写菜单权限，即可编辑全部合法字段。当任一 scope 被标记为已配置后，该租户 MUST 进入严格 ACL，不再仅凭菜单写权限获得全字段编辑权。
+
+#### Scenario: 全新租户未配置
+
+- **WHEN** 租户两 scope 均未配置，且用户具备既有写菜单权限
+- **THEN** 详情返回全部合法字段为可编辑，保存可更新这些字段
+
+#### Scenario: 首次配置后收紧
+
+- **WHEN** 管理员首次成功保存任一 scope 的 ACL
+- **THEN** 之后该租户按严格 ACL 解析可编辑字段与保存权限
+
+### Requirement: 保存时服务端强制 merge
+
+储存证质检保存接口 MUST 仅更新当前用户有权编辑的字段；无权字段 MUST 保留库中原值。若请求试图修改无权字段的值，系统 MUST 拒绝该请求。当用户没有任何可编辑字段时，系统 MUST 拒绝保存。
+
+#### Scenario: 部分字段可写
+
+- **WHEN** 用户仅对字段集合 A 有编辑权并提交包含 A 与其他字段的 payload
+- **THEN** 仅 A 中相对原值有权限的变更被写入，其他键保持原值；若其他键相对原值发生变化则整单拒绝
+
+#### Scenario: 无可写字段
+
+- **WHEN** 当前用户可编辑字段为空并调用保存接口
+- **THEN** 系统拒绝保存
+
+### Requirement: 配置入口与主弹窗交互
+
+Web 管理端储存证质检弹窗在用户具备 ACL 配置权限时，SHALL 在 footer 左侧提供「质检权限」「生产权限」入口。配置界面 SHALL 提供两个 Tab：勾选可编辑字段、配置可编辑人员。不具备配置权限的用户 MUST 看不到上述入口。不具备字段编辑权的用户打开业务弹窗时 MUST 以只读方式展示字段，且不得出现可提交业务保存的主按钮（或等价禁用）。
+
+#### Scenario: 管理员可见配置按钮
+
+- **WHEN** 具备 ACL 配置菜单权限的用户打开填写弹窗
+- **THEN** footer 左侧显示质检权限与生产权限按钮
+
+#### Scenario: 普通填写人不可见配置
+
+- **WHEN** 不具备 ACL 配置菜单权限的用户打开填写弹窗
+- **THEN** 不显示质检权限与生产权限按钮
+
+#### Scenario: 三处入口一致
+
+- **WHEN** 用户从客户服务、质检工单或生产工单打开同一储存证质检弹窗
+- **THEN** 字段可编辑性与配置入口可见性均按同一 ACL 与菜单规则生效

openspec/changes/storage-cert-qc-field-acl/tasks.md

@@ -0,0 +1,26 @@
+## 1. 数据与后端 ACL
+
+- [x] 1.1 新增 `docs/sql/` 迁移：`biz_storage_cert_qc_acl`、`biz_storage_cert_qc_acl_user`（租户、软删、标准审计字段）
+- [x] 1.2 新增 ORM / CRUD：按 tenant+scope 读写字段列表与人员；保存时校验合法 field key、同步子行
+- [x] 1.3 实现当前用户可编辑字段解析（兼容模式 vs 严格模式、两 scope 并集）
+- [x] 1.4 扩展 GET 详情：返回 `editableFieldKeys`、`canConfigureAcl`、`aclStrict`
+- [x] 1.5 改造 PUT 保存为服务端 merge，无权字段变更拒绝，无可写字段拒绝
+- [x] 1.6 新增 ACL GET/PUT API，鉴权独立配置菜单码
+- [x] 1.7 补充/调整 `backend/tests/test_sample_storage_cert_qc.py`（及 ACL 用例）覆盖兼容、严格、并集、拒绝篡改
+
+## 2. Web 主弹窗与配置弹窗
+
+- [x] 2.1 按已确认 Figma 原型调整 `storage-cert-qc-dialog` footer（左侧配置按钮、右侧取消/确定）与字段只读态
+- [x] 2.2 新增 ACL 配置弹窗（质检/生产）：Tab1 分组勾选字段，Tab2 选人，保存调 ACL API
+- [x] 2.3 接入 API 客户端与菜单码；无配置权限不展示入口；无可写字段隐藏业务确定
+- [x] 2.4 核对客户服务 / 质检工单 / 生产工单三处入口共用行为
+
+## 3. 权限种子与文档回写
+
+- [x] 3.1 增加配置菜单码种子/SQL（命名与路由约定一致），说明仅管理员授予
+- [ ] 3.2 工单回写：OpenSpec 路径、Figma 链接、验收要点；原型确认结论
+
+## 4. 验证
+
+- [x] 4.1 在任务 worktree 运行受影响后端单元测试并记录结果
+- [x] 4.2 源码级对照已确认原型（footer 布局、双 Tab、按钮主次、只读态）

web-admin/src/api/sample-storage-cert-qc.ts

@@ -12,6 +12,20 @@ export type SampleStorageCertQcDetail = {
   filledFlag: boolean
   payload: Record<string, unknown>
   prefill?: Record<string, unknown>
+  editableFieldKeys?: string[]
+  canConfigureAcl?: boolean
+  aclStrict?: boolean
+}
+
+export type StorageCertQcAclScope = 'qc' | 'production'
+
+export type StorageCertQcAclDetail = {
+  scope: StorageCertQcAclScope
+  fieldKeys: string[]
+  userIds: string[]
+  users: Array<{ id: string; nickName: string; userName: string }>
+  configuredFlag: boolean
+  aclStrict: boolean
 }
 
 export function fetchSampleStorageCertQc(sampleCode: string) {
@@ -29,3 +43,19 @@ export function saveSampleStorageCertQc(
     data
   })
 }
+
+export function fetchSampleStorageCertQcAcl(scope: StorageCertQcAclScope) {
+  return request.get({
+    url: `/web/admin/sample-storage-cert-qc-acl/${encodeURIComponent(scope)}`
+  })
+}
+
+export function saveSampleStorageCertQcAcl(
+  scope: StorageCertQcAclScope,
+  data: { fieldKeys: string[]; userIds: string[] }
+) {
+  return request.put({
+    url: `/web/admin/sample-storage-cert-qc-acl/${encodeURIComponent(scope)}`,
+    data
+  })
+}

web-admin/src/components/business/storage-cert-qc-acl-dialog/index.vue

@@ -0,0 +1,308 @@
+<template>
+  <el-dialog
+    :model-value="visible"
+    :title="dialogTitle"
+    width="720px"
+    class="dialog-form-layout storage-cert-qc-acl-dialog"
+    align-center
+    append-to-body
+    destroy-on-close
+    modal-class="protocol-dialog-mask"
+    @update:model-value="emit('update:visible', $event)"
+  >
+    <div v-loading="loading" class="storage-cert-qc-acl-dialog__body">
+      <el-tabs v-model="activeTab">
+        <el-tab-pane label="勾选可编辑字段" name="fields">
+          <div class="field-toolbar">
+            <el-button @click="selectAllFields">
+              <el-icon><Select /></el-icon>
+              全选
+            </el-button>
+            <el-button @click="clearAllFields">
+              <el-icon><RefreshLeft /></el-icon>
+              取消全选
+            </el-button>
+          </div>
+          <div v-for="(group, gi) in fieldGroups" :key="gi" class="field-block">
+            <div class="field-block__title">{{ group.title }}</div>
+            <el-checkbox-group v-model="selectedKeys" class="field-check-grid">
+              <el-checkbox
+                v-for="field in group.fields"
+                :key="field.key"
+                :label="field.key"
+                class="field-check"
+              >
+                {{ field.label }}
+              </el-checkbox>
+            </el-checkbox-group>
+          </div>
+        </el-tab-pane>
+        <el-tab-pane label="配置人员" name="users">
+          <el-select
+            v-model="selectedUserIds"
+            multiple
+            filterable
+            remote
+            clearable
+            reserve-keyword
+            :remote-method="searchUsers"
+            :loading="userLoading"
+            placeholder="输入姓名或账号搜索"
+            style="width: 100%"
+          >
+            <el-option
+              v-for="u in userOptions"
+              :key="u.value"
+              :label="u.label"
+              :value="u.value"
+            />
+          </el-select>
+          <div class="form-tip">仅名单内用户可修改本权限勾选的字段。</div>
+        </el-tab-pane>
+      </el-tabs>
+    </div>
+
+    <template #footer>
+      <el-button @click="emit('update:visible', false)">
+        <el-icon><Close /></el-icon>
+        取消
+      </el-button>
+      <el-button type="primary" :loading="saving" @click="handleSave">
+        <el-icon><Check /></el-icon>
+        保存
+      </el-button>
+    </template>
+  </el-dialog>
+</template>
+
+<script setup lang="ts">
+  import { Check, Close, RefreshLeft, Select } from '@element-plus/icons-vue'
+  import { ElMessage } from 'element-plus'
+  import { fetchUserList } from '@/api/admin'
+  import {
+    fetchSampleStorageCertQcAcl,
+    saveSampleStorageCertQcAcl,
+    type StorageCertQcAclScope
+  } from '@/api/sample-storage-cert-qc'
+  import { STORAGE_CERT_QC_GROUPS } from '@/utils/storage-cert-qc-fields'
+
+  const props = defineProps<{
+    visible: boolean
+    scope: StorageCertQcAclScope
+  }>()
+
+  const emit = defineEmits<{
+    (e: 'update:visible', v: boolean): void
+    (e: 'saved'): void
+  }>()
+
+  const loading = ref(false)
+  const saving = ref(false)
+  const userLoading = ref(false)
+  const activeTab = ref('fields')
+  const selectedKeys = ref<string[]>([])
+  const selectedUserIds = ref<string[]>([])
+  const userOptions = ref<Array<{ label: string; value: string }>>([])
+
+  const dialogTitle = computed(() => (props.scope === 'qc' ? '质检权限' : '生产权限'))
+
+  const fieldGroups = computed(() => {
+    const map = new Map<string, { title: string; fields: Array<{ key: string; label: string }> }>()
+    for (const groups of Object.values(STORAGE_CERT_QC_GROUPS)) {
+      for (const group of groups) {
+        const item = map.get(group.title) || { title: group.title, fields: [] }
+        const seen = new Set(item.fields.map((f) => f.key))
+        for (const field of group.fields) {
+          if (seen.has(field.key)) continue
+          seen.add(field.key)
+          item.fields.push({ key: field.key, label: field.label })
+        }
+        map.set(group.title, item)
+      }
+    }
+    return Array.from(map.values())
+  })
+
+  const allFieldKeys = computed(() => {
+    const keys: string[] = []
+    const seen = new Set<string>()
+    for (const group of fieldGroups.value) {
+      for (const field of group.fields) {
+        if (seen.has(field.key)) continue
+        seen.add(field.key)
+        keys.push(field.key)
+      }
+    }
+    return keys
+  })
+
+  function selectAllFields() {
+    selectedKeys.value = [...allFieldKeys.value]
+  }
+
+  function clearAllFields() {
+    selectedKeys.value = []
+  }
+
+  function formatUserOption(row: {
+    id?: string
+    nickName?: string
+    userName?: string
+    userNo?: string
+  }) {
+    const id = String(row.id || '')
+    if (!id) return null
+    const name = String(row.nickName || row.userName || row.userNo || id)
+    const account = String(row.userName || row.userNo || '')
+    return { value: id, label: account ? `${name}（${account}）` : name }
+  }
+
+  function upsertUserOption(id: string, label: string) {
+    if (!id) return
+    if (userOptions.value.some((u) => u.value === id)) return
+    userOptions.value.push({ value: id, label: label || id })
+  }
+
+  async function searchUsers(keyword: string) {
+    userLoading.value = true
+    try {
+      const res = await fetchUserList({
+        page: 1,
+        pageSize: 50,
+        status: '1',
+        keyword: (keyword || '').trim() || undefined
+      })
+      const list = (res as any)?.list || []
+      const next: Array<{ label: string; value: string }> = []
+      const seen = new Set<string>()
+      for (const row of list) {
+        const opt = formatUserOption(row)
+        if (!opt || seen.has(opt.value)) continue
+        seen.add(opt.value)
+        next.push(opt)
+      }
+      // 已选人员不在本页结果中时保留，避免标签丢失且不影响远程模糊检索展示
+      for (const id of selectedUserIds.value) {
+        if (seen.has(id)) continue
+        const keep = userOptions.value.find((u) => u.value === id)
+        if (keep) {
+          seen.add(id)
+          next.unshift(keep)
+        }
+      }
+      userOptions.value = next
+    } catch {
+      // 检索失败时仍保留已选项，避免清空已配置人员标签
+      userOptions.value = userOptions.value.filter((u) =>
+        selectedUserIds.value.includes(u.value)
+      )
+    } finally {
+      userLoading.value = false
+    }
+  }
+
+  async function loadDetail() {
+    loading.value = true
+    activeTab.value = 'fields'
+    try {
+      const detail = (await fetchSampleStorageCertQcAcl(props.scope)) as any
+      selectedKeys.value = Array.isArray(detail?.fieldKeys) ? [...detail.fieldKeys] : []
+      selectedUserIds.value = Array.isArray(detail?.userIds) ? [...detail.userIds] : []
+      userOptions.value = []
+      for (const u of detail?.users || []) {
+        const opt = formatUserOption({
+          id: u.id,
+          nickName: u.nickName,
+          userName: u.userName
+        })
+        if (opt) upsertUserOption(opt.value, opt.label)
+      }
+      // 预拉一批启用用户；真正按姓名/账号模糊检索在输入时由 remote-method 触发
+      await searchUsers('')
+    } catch {
+      selectedKeys.value = []
+      selectedUserIds.value = []
+    } finally {
+      loading.value = false
+    }
+  }
+
+  async function handleSave() {
+    saving.value = true
+    try {
+      await saveSampleStorageCertQcAcl(props.scope, {
+        fieldKeys: [...selectedKeys.value],
+        userIds: [...selectedUserIds.value]
+      })
+      ElMessage.success('保存成功')
+      emit('saved')
+      emit('update:visible', false)
+    } finally {
+      saving.value = false
+    }
+  }
+
+  watch(
+    () => [props.visible, props.scope] as const,
+    ([vis]) => {
+      if (vis) loadDetail()
+    }
+  )
+</script>
+
+<style scoped lang="scss">
+  .storage-cert-qc-acl-dialog__body {
+    min-height: 280px;
+  }
+
+  .field-toolbar {
+    display: flex;
+    flex-wrap: wrap;
+    gap: 8px;
+    margin-bottom: 12px;
+  }
+
+  .field-block {
+    margin-bottom: 14px;
+  }
+
+  .field-block__title {
+    margin-bottom: 8px;
+    font-size: 13px;
+    font-weight: 600;
+    color: var(--el-color-primary-dark-2, #059669);
+  }
+
+  .field-check-grid {
+    display: grid;
+    grid-template-columns: repeat(2, minmax(0, 1fr));
+    gap: 6px 16px;
+    width: 100%;
+  }
+
+  .field-check {
+    display: flex;
+    align-items: flex-start;
+    margin-right: 0;
+    margin-bottom: 0;
+    height: auto;
+    white-space: normal;
+
+    :deep(.el-checkbox__label) {
+      white-space: normal;
+      line-height: 1.4;
+    }
+  }
+
+  @media (max-width: 560px) {
+    .field-check-grid {
+      grid-template-columns: 1fr;
+    }
+  }
+
+  .form-tip {
+    margin-top: 10px;
+    font-size: 12px;
+    color: var(--mint-text-muted, #64748b);
+  }
+</style>

web-admin/src/components/business/storage-cert-qc-dialog/index.vue

@@ -54,7 +54,7 @@
                   'form-col-span-3': field.span === 3
                 }"
               >
-                <template v-if="mode === 'view'">
+                <template v-if="mode === 'view' || !isFieldEditable(field.key)">
                   <div
                     class="readonly-box"
                     :class="{ 'is-positive': field.control === 'select_yny' && isPositiveQual(form[field.key]) }"
@@ -112,32 +112,56 @@
     </div>
 
     <template #footer>
-      <template v-if="mode === 'edit'">
+      <div class="storage-cert-qc-dialog__footer">
-        <el-button @click="emit('update:visible', false)">
+        <div class="footer-left">
-          <el-icon><Close /></el-icon>
+          <template v-if="canConfigureAcl">
-          取消
+            <el-button @click="openAcl('qc')">
-        </el-button>
+              <el-icon><Setting /></el-icon>
-        <el-button type="primary" :loading="saving" @click="handleSave">
+              质检权限
-          <el-icon><Check /></el-icon>
+            </el-button>
-          确定
+            <el-button @click="openAcl('production')">
-        </el-button>
+              <el-icon><Setting /></el-icon>
-      </template>
+              生产权限
-      <el-button v-else type="primary" @click="emit('update:visible', false)">
+            </el-button>
-        <el-icon><Check /></el-icon>
+          </template>
-        关闭
+        </div>
-      </el-button>
+        <div class="footer-right">
+          <template v-if="mode === 'edit' && canSaveAny">
+            <el-button @click="emit('update:visible', false)">
+              <el-icon><Close /></el-icon>
+              取消
+            </el-button>
+            <el-button type="primary" :loading="saving" @click="handleSave">
+              <el-icon><Check /></el-icon>
+              确定
+            </el-button>
+          </template>
+          <el-button v-else type="primary" @click="emit('update:visible', false)">
+            <el-icon><Check /></el-icon>
+            关闭
+          </el-button>
+        </div>
+      </div>
     </template>
   </el-dialog>
+
+  <StorageCertQcAclDialog
+    v-model:visible="aclVisible"
+    :scope="aclScope"
+    @saved="loadDetail"
+  />
 </template>
 
 <script setup lang="ts">
-  import { Check, Close } from '@element-plus/icons-vue'
+  import { Check, Close, Setting } from '@element-plus/icons-vue'
   import { ElMessage } from 'element-plus'
   import {
     fetchSampleStorageCertQc,
     saveSampleStorageCertQc,
-    type SampleStorageCertQcDetail
+    type SampleStorageCertQcDetail,
+    type StorageCertQcAclScope
   } from '@/api/sample-storage-cert-qc'
+  import StorageCertQcAclDialog from '@/components/business/storage-cert-qc-acl-dialog/index.vue'
   import {
     STORAGE_CERT_QC_GROUPS,
     isPerinatalQualField,
@@ -166,6 +190,10 @@
   const filledFlag = ref(false)
   const typeKey = ref<StorageCertQcTypeKey | null>(null)
   const form = reactive<Record<string, string>>({})
+  const editableKeySet = ref<Set<string>>(new Set())
+  const canConfigureAcl = ref(false)
+  const aclVisible = ref(false)
+  const aclScope = ref<StorageCertQcAclScope>('qc')
   const identity = reactive({
     labFlowCode: '',
     sampleCode: '',
@@ -174,7 +202,7 @@
   })
 
   const dialogTitle = computed(() =>
-    props.mode === 'edit' ? '填写储存证质检信息' : '查看储存证的质检信息'
+    props.mode === 'edit' && canSaveAny.value ? '填写储存证质检信息' : '查看储存证的质检信息'
   )
 
   const codeFieldLabel = computed(() => {
@@ -184,6 +212,19 @@
 
   const groups = computed(() => (typeKey.value ? STORAGE_CERT_QC_GROUPS[typeKey.value] || [] : []))
 
+  const canSaveAny = computed(
+    () => props.mode === 'edit' && editableKeySet.value.size > 0
+  )
+
+  function isFieldEditable(key: string) {
+    return props.mode === 'edit' && editableKeySet.value.has(key)
+  }
+
+  function openAcl(scope: StorageCertQcAclScope) {
+    aclScope.value = scope
+    aclVisible.value = true
+  }
+
   function displayValue(key: string) {
     const v = form[key]
     if (v == null || String(v).trim() === '') return '—'
@@ -213,6 +254,9 @@
     identity.motherName = detail.motherName || ''
     identity.sampleTypeName = detail.sampleTypeName || props.sampleTypeName || ''
     filledFlag.value = !!detail.filledFlag
+    canConfigureAcl.value = !!detail.canConfigureAcl
+    const keys = Array.isArray(detail.editableFieldKeys) ? detail.editableFieldKeys : []
+    editableKeySet.value = new Set(keys.map((k) => String(k)))
     const resolved =
       (detail.sampleTypeKey as StorageCertQcTypeKey | null) ||
       resolveStorageCertQcTypeKey(identity.sampleTypeName)
@@ -234,6 +278,8 @@
     } catch {
       typeKey.value = resolveStorageCertQcTypeKey(props.sampleTypeName)
       filledFlag.value = false
+      editableKeySet.value = new Set()
+      canConfigureAcl.value = false
       resetFormKeys(typeKey.value, {})
       identity.labFlowCode = ''
       identity.sampleCode = code
@@ -249,6 +295,10 @@
       ElMessage.warning('无法保存：样本类型不支持或缺少样本编码')
       return
     }
+    if (!canSaveAny.value) {
+      ElMessage.warning('当前无字段编辑权限')
+      return
+    }
     const payload: Record<string, unknown> = {}
     for (const group of groups.value) {
       for (const field of group.fields) {
@@ -283,6 +333,21 @@
     min-height: 120px;
   }
 
+  .storage-cert-qc-dialog__footer {
+    display: flex;
+    align-items: center;
+    justify-content: space-between;
+    gap: 12px;
+    width: 100%;
+  }
+
+  .footer-left,
+  .footer-right {
+    display: flex;
+    align-items: center;
+    gap: 8px;
+  }
+
   .ctx-row {
     display: grid;
     grid-template-columns: repeat(4, 1fr);
@@ -405,5 +470,15 @@
     .form-col-span-3 {
       grid-column: 1 / -1;
     }
+
+    .storage-cert-qc-dialog__footer {
+      flex-direction: column;
+      align-items: stretch;
+    }
+
+    .footer-left,
+    .footer-right {
+      justify-content: flex-end;
+    }
   }
 </style>

web-admin/src/utils/collection-ledger-export.test.ts

@@ -10,7 +10,8 @@ import {
   buildFreightMergeRanges,
   buildPresignLedgerRows,
   buildResearchLedgerRows,
-  formatLedgerDateTime
+  formatLedgerDateTime,
+  groupFlatRowsByFreightBatch
 } from './collection-ledger-export'
 import type { ProtocolAuditFlatRow } from './protocol-audit-flatten'
 
@@ -194,6 +195,71 @@ describe('buildCellStorageLedgerRows', () => {
       { startRow: 2, endRow: 3, startCol: 54, endCol: 54 }
     ])
   })
+
+  it('groups non-adjacent same freight batch before merging cells', () => {
+    const shared = {
+      protocol: { protocolStatus: 'sxz', remark: '', voidType: '', voidDesc: '' },
+      sampleCollectTime: '2025-09-11 18:13:00',
+      sampleTypeName: 'NK',
+      regionName: '常州',
+      hospitalName: '溧阳市人民医院',
+      freightTransportLabel: '专线车',
+      freightAmountLabel: '100'
+    }
+    const { rows, merges } = buildCellStorageLedgerRows([
+      {
+        ...shared,
+        motherName: '甲',
+        sampleCode: 'S1',
+        labStorageCode: 'UBMC1',
+        freightId: 'batch-cell'
+      } as unknown as ProtocolAuditFlatRow,
+      {
+        ...shared,
+        motherName: '丙',
+        sampleCode: 'S3',
+        labStorageCode: 'UBMC3',
+        freightId: 'other',
+        freightTransportLabel: '快递',
+        freightAmountLabel: '25'
+      } as unknown as ProtocolAuditFlatRow,
+      {
+        ...shared,
+        motherName: '乙',
+        sampleCode: 'S2',
+        labStorageCode: 'UBMC2',
+        freightId: 'batch-cell'
+      } as unknown as ProtocolAuditFlatRow
+    ])
+    assert.equal(rows[0][8], '甲')
+    assert.equal(rows[1][8], '乙')
+    assert.equal(rows[2][8], '丙')
+    assert.equal(rows[0][52], '专线车')
+    assert.equal(rows[0][53], '100')
+    assert.equal(rows[1][52], '')
+    assert.equal(rows[1][53], '')
+    assert.equal(rows[2][52], '快递')
+    assert.equal(rows[2][53], '25')
+    assert.deepEqual(merges, [
+      { startRow: 2, endRow: 3, startCol: 53, endCol: 53 },
+      { startRow: 2, endRow: 3, startCol: 54, endCol: 54 }
+    ])
+  })
+})
+
+describe('groupFlatRowsByFreightBatch', () => {
+  it('keeps first-seen batch order and leaves empty freight rows in place', () => {
+    const arranged = groupFlatRowsByFreightBatch([
+      { motherName: 'A', freightId: 'f1' },
+      { motherName: 'B', freightId: '' },
+      { motherName: 'C', freightId: 'f1' },
+      { motherName: 'D', freightId: 'f2' }
+    ] as unknown as ProtocolAuditFlatRow[])
+    assert.deepEqual(
+      arranged.map((row) => row.motherName),
+      ['A', 'C', 'B', 'D']
+    )
+  })
 })
 
 describe('buildResearchLedgerRows', () => {
@@ -335,6 +401,50 @@ describe('buildResearchLedgerRows', () => {
       { startRow: 3, endRow: 4, startCol: 18, endCol: 18 }
     ])
   })
+
+  it('groups non-adjacent same freight batch before merging research cells', () => {
+    const shared = {
+      protocol: { donationStatus: 'sxz', voidType: '', voidDesc: '', monthlyVerifyNo: '' },
+      sampleCollectTime: '2025-09-11 18:13:00',
+      sampleTypeName: 'NK',
+      regionName: '常州',
+      hospitalName: '溧阳市人民医院',
+      freightTransportLabel: '专线车',
+      freightAmountLabel: '100'
+    }
+    const { rows, merges } = buildResearchLedgerRows([
+      {
+        ...shared,
+        motherName: '甲',
+        labStorageCode: 'A1',
+        freightId: 'batch-a'
+      } as unknown as ProtocolAuditFlatRow,
+      {
+        ...shared,
+        motherName: '散',
+        labStorageCode: 'A9',
+        freightId: '',
+        freightTransportLabel: '',
+        freightAmountLabel: ''
+      } as unknown as ProtocolAuditFlatRow,
+      {
+        ...shared,
+        motherName: '乙',
+        labStorageCode: 'A2',
+        freightId: 'batch-a'
+      } as unknown as ProtocolAuditFlatRow
+    ])
+    assert.equal(rows[0][8], '甲')
+    assert.equal(rows[1][8], '乙')
+    assert.equal(rows[2][8], '散')
+    assert.equal(rows[0][16], '专线车')
+    assert.equal(rows[1][16], '')
+    assert.equal(rows[1][17], '')
+    assert.deepEqual(merges, [
+      { startRow: 2, endRow: 3, startCol: 17, endCol: 17 },
+      { startRow: 2, endRow: 3, startCol: 18, endCol: 18 }
+    ])
+  })
 })
 
 describe('buildCustomerServiceLedgerRows', () => {

web-admin/src/utils/collection-ledger-export.ts

@@ -1,8 +1,5 @@
 import type { ProtocolAuditFlatRow } from './protocol-audit-flatten'
 
-/** 采集大表导出入口开关；验收未完成前隐藏按钮，改 true 即可恢复。 */
-export const COLLECTION_LEDGER_EXPORT_ENABLED = false
-
 type Row = Record<string, unknown>
 type PayDetail = {
   installmentNo?: number | null
@@ -341,6 +338,36 @@ function researchMaternalBloodText(value: unknown): string {
   return text(value) ? text(value) : '无母血'
 }
 
+/**
+ * 将同一运费批次的行聚拢到一起（按首次出现顺序），无批次行保持相对位置。
+ * 模版要求同批次运输方式/运费合并单元格，故导出前先归拢再合并。
+ */
+export function groupFlatRowsByFreightBatch(
+  rows: ProtocolAuditFlatRow[]
+): ProtocolAuditFlatRow[] {
+  const groups = new Map<string, ProtocolAuditFlatRow[]>()
+  const sequence: Array<{ kind: 'batch'; id: string } | { kind: 'single'; row: ProtocolAuditFlatRow }> =
+    []
+  for (const row of rows) {
+    const freightId = text(row.freightId)
+    if (!freightId) {
+      sequence.push({ kind: 'single', row })
+      continue
+    }
+    if (!groups.has(freightId)) {
+      groups.set(freightId, [])
+      sequence.push({ kind: 'batch', id: freightId })
+    }
+    groups.get(freightId)!.push(row)
+  }
+  const arranged: ProtocolAuditFlatRow[] = []
+  for (const item of sequence) {
+    if (item.kind === 'single') arranged.push(item.row)
+    else arranged.push(...(groups.get(item.id) || []))
+  }
+  return arranged
+}
+
 /**
  * 相邻且 freightId 相同的导出行，合并运输方式/运费列（Excel 行号含表头）。
  * @param transportCol 运输方式列（1-based）
@@ -626,9 +653,10 @@ export function buildCellStorageLedgerRows(rows: ProtocolAuditFlatRow[]): {
   rows: string[][]
   merges: LedgerMergeRange[]
 } {
-  const freightIds = rows.map((row) => text(row.freightId))
+  const arranged = groupFlatRowsByFreightBatch(rows)
-  const built = rows.map((row, index) => storageLedgerRow(row, index, false))
+  const freightIds = arranged.map((row) => text(row.freightId))
-  // 自存表：运输方式=53，运费=54
+  const built = arranged.map((row, index) => storageLedgerRow(row, index, false))
+  // 自存表：运输方式=53，运费=54（对齐模版《自存表》）
   return { rows: built, merges: applyFreightMerges(built, freightIds, 53, 54) }
 }
 
@@ -636,9 +664,10 @@ export function buildResearchLedgerRows(rows: ProtocolAuditFlatRow[]): {
   rows: string[][]
   merges: LedgerMergeRange[]
 } {
-  const freightIds = rows.map((row) => text(row.freightId))
+  const arranged = groupFlatRowsByFreightBatch(rows)
-  const built = rows.map((row, index) => storageLedgerRow(row, index, true))
+  const freightIds = arranged.map((row) => text(row.freightId))
-  // 科研表：运输方式=17，运费=18
+  const built = arranged.map((row, index) => storageLedgerRow(row, index, true))
+  // 科研表：运输方式=17，运费=18（对齐模版《科研表》）
   return { rows: built, merges: applyFreightMerges(built, freightIds, 17, 18) }
 }
 
@@ -704,6 +733,19 @@ function fileStamp(): string {
   return `${stamp.getFullYear()}${pad(stamp.getMonth() + 1)}${pad(stamp.getDate())}${pad(stamp.getHours())}${pad(stamp.getMinutes())}${pad(stamp.getSeconds())}`
 }
 
+const LEDGER_CELL_BORDER = {
+  top: { style: 'thin' as const },
+  left: { style: 'thin' as const },
+  bottom: { style: 'thin' as const },
+  right: { style: 'thin' as const }
+}
+
+const LEDGER_HEADER_FILL = {
+  type: 'pattern' as const,
+  pattern: 'solid' as const,
+  fgColor: { argb: 'FFFFFF00' }
+}
+
 export async function saveCollectionLedgerWorkbook(
   sheetName: string,
   headers: string[],
@@ -715,25 +757,31 @@ export async function saveCollectionLedgerWorkbook(
   const FileSaver = (await import('file-saver')).default
   const workbook = new ExcelJS.Workbook()
   const sheet = workbook.addWorksheet(sheetName)
+  const colCount = headers.length
   const headerRow = sheet.addRow(headers)
-  headerRow.eachCell((cell) => {
+  for (let col = 1; col <= colCount; col += 1) {
+    const cell = headerRow.getCell(col)
     cell.numFmt = '@'
-    cell.alignment = { wrapText: true, vertical: 'middle' }
+    cell.alignment = { wrapText: true, vertical: 'middle', horizontal: 'center' }
-  })
+    cell.fill = LEDGER_HEADER_FILL
+    cell.border = LEDGER_CELL_BORDER
+  }
   rows.forEach((line) => {
     const added = sheet.addRow(line)
-    line.forEach((value, index) => {
+    for (let col = 1; col <= colCount; col += 1) {
-      const cell = added.getCell(index + 1)
+      const cell = added.getCell(col)
-      cell.value = value
+      cell.value = line[col - 1] ?? ''
       cell.numFmt = '@'
       cell.alignment = { vertical: 'middle', horizontal: 'center', wrapText: true }
-    })
+      cell.border = LEDGER_CELL_BORDER
+    }
   })
   merges.forEach((merge) => {
     if (merge.endRow <= merge.startRow) return
     sheet.mergeCells(merge.startRow, merge.startCol, merge.endRow, merge.endCol)
     const cell = sheet.getCell(merge.startRow, merge.startCol)
     cell.alignment = { vertical: 'middle', horizontal: 'center', wrapText: true }
+    cell.border = LEDGER_CELL_BORDER
   })
   headers.forEach((header, index) => {
     sheet.getColumn(index + 1).width = Math.min(28, Math.max(12, header.replace(/\n/g, '').length + 2))

web-admin/src/utils/storage-cert-qc-fields.ts

@@ -33,7 +33,8 @@ export function supportsStorageCertQc(sampleTypeName?: string | null): boolean {
   return resolveStorageCertQcTypeKey(sampleTypeName) != null
 }
 
-const MOTHER_BLOOD: StorageCertQcField[] = [
+/** 围产期造血：母亲血液含三项核酸检测。 */
+const MOTHER_BLOOD_PERINATAL: StorageCertQcField[] = [
   { key: 'mother_hbsag', label: '乙型肝炎病毒表面抗原(HBsAg)', control: 'select_yny' },
   { key: 'mother_hbv_dna', label: '乙型肝炎病毒核酸(HBV DNA)', control: 'select_yny' },
   { key: 'mother_anti_hcv', label: '丙型肝炎病毒抗体(抗HCV)', control: 'select_yny' },
@@ -48,6 +49,15 @@ const MOTHER_BLOOD: StorageCertQcField[] = [
   }
 ]
 
+/** 脐带间充质：不展示 HBV DNA / HCV RNA / HIV-1RNA。 */
+const MOTHER_BLOOD_UC_MSC: StorageCertQcField[] = [
+  { key: 'mother_hbsag', label: '乙型肝炎病毒表面抗原(HBsAg)', control: 'select_yny' },
+  { key: 'mother_anti_hcv', label: '丙型肝炎病毒抗体(抗HCV)', control: 'select_yny' },
+  { key: 'mother_anti_tp', label: '梅毒螺旋体特异性抗体(抗TP)', control: 'select_yny' },
+  { key: 'mother_cmv_igm', label: '巨细胞病毒 IgM 抗体 (CMV IgM)', control: 'select_yny' },
+  { key: 'mother_anti_hiv', label: '人类免疫缺陷病毒抗体(抗HIV-1/2)', control: 'select_yny' }
+]
+
 export const STORAGE_CERT_QC_GROUPS: Record<StorageCertQcTypeKey, StorageCertQcGroup[]> = {
   perinatal_hsc: [
     {
@@ -77,7 +87,7 @@ export const STORAGE_CERT_QC_GROUPS: Record<StorageCertQcTypeKey, StorageCertQcG
         { key: 'cmv_igm', label: '巨细胞病毒 IgM 抗体 (CMV-IgM)', control: 'select_yny' }
       ]
     },
-    { title: '母亲血液检测报告', variant: 'primary', fields: MOTHER_BLOOD },
+    { title: '母亲血液检测报告', variant: 'primary', fields: MOTHER_BLOOD_PERINATAL },
     {
       title: '储存证收尾信息',
       variant: 'meta',
@@ -120,7 +130,7 @@ export const STORAGE_CERT_QC_GROUPS: Record<StorageCertQcTypeKey, StorageCertQcG
         }
       ]
     },
-    { title: '母亲血液检测报告', variant: 'primary', fields: MOTHER_BLOOD },
+    { title: '母亲血液检测报告', variant: 'primary', fields: MOTHER_BLOOD_UC_MSC },
     {
       title: '储存证收尾信息',
       variant: 'meta',

web-admin/src/views/cell-storage/presign-order/index.vue

@@ -56,12 +56,7 @@
             <el-icon><Plus /></el-icon>
             新增预签约
           </el-button>
-          <el-button
+          <el-button class="btn-ghost" :loading="exporting" @click="handleExport">
-            v-if="COLLECTION_LEDGER_EXPORT_ENABLED"
-            class="btn-ghost"
-            :loading="exporting"
-            @click="handleExport"
-          >
             <el-icon><Download /></el-icon>
             导出 Excel
           </el-button>
@@ -208,7 +203,6 @@
   import { Plus, Search, RefreshLeft, Edit, Delete, Check, Download } from '@element-plus/icons-vue'
   import { ElMessage } from 'element-plus'
   import {
-    COLLECTION_LEDGER_EXPORT_ENABLED,
     buildPresignLedgerRows,
     fetchAllPages,
     PRESIGN_HEADERS,

web-admin/src/views/cell-storage/protocol-audit/DonationProtocolTab.vue

@@ -75,12 +75,7 @@
           <el-icon><Plus /></el-icon>
           新增
         </el-button>
-        <el-button
+        <el-button class="btn-ghost" :loading="exporting" @click="handleExport">
-          v-if="COLLECTION_LEDGER_EXPORT_ENABLED"
-          class="btn-ghost"
-          :loading="exporting"
-          @click="handleExport"
-        >
           <el-icon><Download /></el-icon>
           导出 Excel
         </el-button>
@@ -467,7 +462,6 @@
   } from '@/utils/protocol-doc-label'
   import { loadVoidTypeDict } from '@/utils/void-type-dict'
   import {
-    COLLECTION_LEDGER_EXPORT_ENABLED,
     RESEARCH_HEADERS,
     buildResearchLedgerRows,
     fetchAllPages,

web-admin/src/views/cell-storage/protocol-audit/ProtocolAuditTab.vue

@@ -79,12 +79,7 @@
           <el-icon><Plus /></el-icon>
           新增
         </el-button>
-        <el-button
+        <el-button class="btn-ghost" :loading="exporting" @click="handleExport">
-          v-if="COLLECTION_LEDGER_EXPORT_ENABLED"
-          class="btn-ghost"
-          :loading="exporting"
-          @click="handleExport"
-        >
           <el-icon><Download /></el-icon>
           导出 Excel
         </el-button>
@@ -435,7 +430,6 @@
   } from '@/utils/status-tag-registry'
   import { loadVoidTypeDict } from '@/utils/void-type-dict'
   import {
-    COLLECTION_LEDGER_EXPORT_ENABLED,
     CELL_STORAGE_HEADERS,
     buildCellStorageLedgerRows,
     fetchAllPages,

web-admin/src/views/cell-storage/sample-info/UnifiedSampleInfoPage.vue

@@ -93,7 +93,7 @@
           登记入库
         </el-button>
         <el-button
-          v-if="isCellStorage && COLLECTION_LEDGER_EXPORT_ENABLED"
+          v-if="isCellStorage"
           class="btn-ghost"
           :loading="exporting"
           @click="handleExport"
@@ -243,7 +243,7 @@
             <template #default="{ row }">{{ row.newbornIdCard || '—' }}</template>
           </el-table-column>
           <el-table-column prop="newbornSex" label="性别" min-width="70" align="center">
-            <template #default="{ row }">{{ sexLabel(row.newbornSex) }}</template>
+            <template #default="{ row }">{{ formatNewbornSex(row.newbornSex) }}</template>
           </el-table-column>
           <el-table-column prop="newbornDeliveryTime" label="分娩时间" min-width="160" align="center" show-overflow-tooltip>
             <template #default="{ row }">{{ row.newbornDeliveryTime || '—' }}</template>
@@ -510,6 +510,7 @@
     donationStatusTagType,
     handleDoneFlagLabel,
     handleDoneFlagTagType,
+    newbornSexLabel,
     protocolStatusDisplayLabel,
     protocolStatusTagType,
     sampleCollectionFlagLabel,
@@ -522,7 +523,6 @@
     sampleStorageFlagTagType
   } from '@/utils/status-tag-registry'
   import {
-    COLLECTION_LEDGER_EXPORT_ENABLED,
     CUSTOMER_SERVICE_HEADERS,
     buildCustomerServiceLedgerRows,
     fetchAllPages,
@@ -572,11 +572,11 @@
   const codeCorrectionVisible = ref(false)
   const codeCorrectionOldCode = ref('')
 
-  function sexLabel(sex: unknown) {
+  /** 与协议表单一致：'1'=男，'0'=女；空值显示 —（勿与客户 sexLabel 0男1女混淆） */
-    const s = String(sex || '').trim()
+  function formatNewbornSex(sex: unknown) {
-    if (s === '1' || s === '男') return '男'
+    const s = sex == null || sex === '' ? '' : String(sex).trim()
-    if (s === '2' || s === '女') return '女'
+    if (!s) return '—'
-    return s || '—'
+    return newbornSexLabel(s) || '—'
   }
 
   function openStorageCertQcEdit(row: Record<string, unknown>) {

web-admin/src/views/project-management/RecordList.vue

@@ -78,15 +78,41 @@
         <el-icon><RefreshRight /></el-icon>重试
       </el-button>
     </el-alert>
+    <div v-if="assignment" class="list-toolbar">
+      <div class="list-toolbar-row">
+        <div class="list-toolbar-selected">
+          已选 <span class="sel-num">{{ selectedRows.length }}</span> 项
+        </div>
+        <el-button
+          type="primary"
+          class="btn-main"
+          :disabled="!selectedRows.length || busy"
+          @click="openBatch"
+        >
+          <el-icon><Edit /></el-icon>批量调整归属
+        </el-button>
+      </div>
+    </div>
     <div class="list-body list-wrap"
       ><el-table
+        ref="tableRef"
         :key="query.bizType"
         :data="rows"
         v-loading="loading"
         class="list-table"
         stripe
+        row-key="id"
         :empty-text="loading ? '正在加载…' : loadError ? '数据加载失败' : '暂无符合条件的单据'"
+        @selection-change="handleSelectionChange"
       >
+        <el-table-column
+          v-if="assignment"
+          type="selection"
+          min-width="48"
+          align="center"
+          header-align="center"
+          fixed
+        />
         <el-table-column
           type="index"
           label="序号"
@@ -151,26 +177,26 @@
     >
       <el-form class="form-grid-2" label-position="top">
         <el-form-item label="原所属项目组">
-          <el-input :model-value="selected.teamName || '未归属'" disabled />
+          <el-input :model-value="originalTeamLabel" disabled />
         </el-form-item>
         <el-form-item label="原所属项目">
-          <el-input :model-value="selected.projectName || '未归属'" disabled />
+          <el-input :model-value="originalProjectLabel" disabled />
         </el-form-item>
         <el-form-item label="新项目组" required>
           <ProjectSelect
-            :key="`team-${selected.id}`"
+            :key="`team-${dialogSelectKey}`"
             team
             v-model="targetTeamId"
-            :biz-type="selected.bizType"
+            :biz-type="dialogBizType"
             @update:model-value="onTargetTeamChange"
           />
         </el-form-item>
         <el-form-item label="新项目" required>
           <ProjectSelect
-            :key="`project-${selected.id}-${targetTeamId}`"
+            :key="`project-${dialogSelectKey}-${targetTeamId}`"
             v-model="target"
             :team-id="targetTeamId"
-            :biz-type="selected.bizType"
+            :biz-type="dialogBizType"
             :disabled="!targetTeamId"
           />
         </el-form-item>
@@ -262,6 +288,7 @@
     page: 1,
     pageSize: 20
   })
+  const tableRef = ref<{ clearSelection?: () => void } | null>(null)
   const rows = ref<ProjectRecord[]>([]),
     total = ref(0),
     statusCounts = ref<Record<string, number>>({}),
@@ -273,6 +300,8 @@
     target = ref(''),
     reason = ref(''),
     selected = ref<ProjectRecord>({}),
+    selectedRows = ref<ProjectRecord[]>([]),
+    editTargets = ref<ProjectRecord[]>([]),
     historyVisible = ref(false),
     historyRows = ref<ProjectRecord[]>([])
   const visibleColumns = computed(() =>
@@ -283,6 +312,39 @@
   const keywordHint = computed(() =>
     query.bizType === 'presign' ? '请输入单据编号' : assignmentKeywordHints[query.bizType]
   )
+  const dialogBizType = computed(
+    () =>
+      (editTargets.value[0]?.bizType ||
+        selected.value.bizType ||
+        query.bizType) as AssignmentBizType
+  )
+  const dialogSelectKey = computed(() => {
+    if (editTargets.value.length <= 1) {
+      return String(editTargets.value[0]?.id || selected.value.id || 'empty')
+    }
+    const firstId = editTargets.value[0]?.id || ''
+    const lastId = editTargets.value[editTargets.value.length - 1]?.id || ''
+    return `batch-${editTargets.value.length}-${firstId}-${lastId}`
+  })
+  const originalTeamLabel = computed(() => {
+    if (editTargets.value.length <= 1) {
+      return editTargets.value[0]?.teamName || selected.value.teamName || '未归属'
+    }
+    return `共 ${editTargets.value.length} 条`
+  })
+  const originalProjectLabel = computed(() => {
+    if (editTargets.value.length <= 1) {
+      return editTargets.value[0]?.projectName || selected.value.projectName || '未归属'
+    }
+    return `共 ${editTargets.value.length} 条`
+  })
+  function clearSelection() {
+    selectedRows.value = []
+    tableRef.value?.clearSelection?.()
+  }
+  function handleSelectionChange(selection: ProjectRecord[]) {
+    selectedRows.value = selection
+  }
   let loadVersion = 0
   function statusLabel(status: string) {
     return query.bizType === 'presign'
@@ -307,6 +369,7 @@
     loading.value = true
     loadError.value = false
     rows.value = []
+    clearSelection()
     try {
       const fetchRecords = props.assignment
         ? fetchAssignmentRecords
@@ -344,6 +407,7 @@
     statusCounts.value = {}
     visible.value = false
     historyVisible.value = false
+    clearSelection()
     search()
   }
   function switchBusiness(kind: AssignmentBizType) {
@@ -360,16 +424,41 @@
     query.page = page
     load()
   }
-  function open(row: ProjectRecord) {
+  function resetDialogForm(targets: ProjectRecord[]) {
-    selected.value = row
+    editTargets.value = targets
+    selected.value = targets[0] || {}
     targetTeamId.value = ''
     target.value = ''
     reason.value = ''
     visible.value = true
   }
+  function open(row: ProjectRecord) {
+    resetDialogForm([row])
+  }
+  function openBatch() {
+    if (!selectedRows.value.length) {
+      ElMessage.warning('请先选择要调整的记录')
+      return
+    }
+    resetDialogForm([...selectedRows.value])
+  }
   function onTargetTeamChange() {
     target.value = ''
   }
+  async function assignOne(row: ProjectRecord, projectId: string, assignReason: string) {
+    const preview = await previewAssignment({
+      bizType: row.bizType,
+      id: row.id,
+      projectId
+    })
+    await saveAssignment({
+      bizType: row.bizType,
+      id: row.id,
+      projectId,
+      reason: assignReason,
+      expectedAssignments: assignmentSnapshot(preview.records)
+    })
+  }
   async function commit() {
     if (!targetTeamId.value) {
       ElMessage.warning('请选择新项目组')
@@ -383,33 +472,45 @@
       ElMessage.warning('请填写调整原因')
       return
     }
+    const targets = editTargets.value.length ? [...editTargets.value] : [selected.value]
+    if (!targets.length || !targets[0]?.id) {
+      ElMessage.warning('请选择要调整的记录')
+      return
+    }
     busy.value = true
     const commitTarget = target.value
-    const commitRecord = selected.value
+    const commitReason = reason.value.trim()
+    const commitTargets = targets
+    let successCount = 0
+    let failCount = 0
     try {
-      const preview = await previewAssignment({
+      for (const row of commitTargets) {
-        bizType: selected.value.bizType,
+        if (target.value !== commitTarget || !visible.value) {
-        id: selected.value.id,
+          return
-        projectId: target.value
+        }
-      })
+        try {
-      if (selected.value !== commitRecord || target.value !== commitTarget || !visible.value) {
+          await assignOne(row, commitTarget, commitReason)
+          successCount += 1
+        } catch {
+          failCount += 1
+          // API layer already surfaces the conflict / validation message.
+        }
+      }
+      if (target.value !== commitTarget || !visible.value) {
         return
       }
-      await saveAssignment({
+      if (successCount > 0) {
-        bizType: selected.value.bizType,
+        visible.value = false
-        id: selected.value.id,
+        clearSelection()
-        projectId: target.value,
+        if (failCount === 0) {
-        reason: reason.value.trim(),
+          ElMessage.success(
-        expectedAssignments: assignmentSnapshot(preview.records)
+            commitTargets.length > 1 ? `已调整 ${successCount} 条归属` : '归属已调整'
-      })
+          )
-      if (selected.value !== commitRecord || target.value !== commitTarget || !visible.value) {
+        } else {
-        return
+          ElMessage.warning(`成功 ${successCount} 条，失败 ${failCount} 条`)
+        }
+        await load()
       }
-      visible.value = false
-      ElMessage.success('归属已调整')
-      await load()
-    } catch {
-      // API layer already surfaces the conflict / validation message.
     } finally {
       busy.value = false
     }

web-admin/src/views/quality-inspection/sample-reception/SampleReceptionCardList.vue

@@ -70,21 +70,16 @@
                 <dt>样本类型</dt>
                 <dd>{{ row.sampleTypeName || '—' }}</dd>
               </div>
-              <div class="sample-reception-card__meta-item sample-reception-card__meta-item--attachment">
+              <div
-                <dt>{{ attachmentMeta(row).label }}</dt>
+                v-for="group in protocolAttachmentGroups(row)"
+                :key="group.label"
+                class="sample-reception-card__meta-item sample-reception-card__meta-item--attachment"
+              >
+                <dt>{{ group.label }}</dt>
                 <dd>
                   <ProtocolAttachmentMiniReadonly
-                    :files="attachmentMeta(row).files"
+                    :files="group.files"
-                    @preview="handleAttachmentPreview"
+                    empty-text="暂无附件"
-                    @download="handleAttachmentDownload"
-                  />
-                </dd>
-              </div>
-              <div class="sample-reception-card__meta-item sample-reception-card__meta-item--attachment">
-                <dt>{{ consentAttachmentMeta(row).label }}</dt>
-                <dd>
-                  <ProtocolAttachmentMiniReadonly
-                    :files="consentAttachmentMeta(row).files"
                     @preview="handleAttachmentPreview"
                     @download="handleAttachmentDownload"
                   />
@@ -252,10 +247,7 @@
   import SampleCodeWithSpecialDisplay from '@/components/business/sample-code-with-special-display/index.vue'
   import QcWorkOrderProtocolPaymentPanel from '@/views/quality-inspection/qc-work-order/QcWorkOrderProtocolPaymentPanel.vue'
   import ProtocolAttachmentMiniReadonly from '@/components/business/protocol-attachment-mini-readonly/index.vue'
-  import {
+  import { getSourceProtocolAttachmentGroups } from '@/utils/protocol-source-attachment'
-    getConsentProtocolAttachment,
-    getSourceProtocolAttachment
-  } from '@/utils/protocol-source-attachment'
   import { useAttachmentActions } from '@/composables/useAttachmentActions'
 
   defineOptions({ name: 'SampleReceptionCardList' })
@@ -293,12 +285,8 @@
 
   const { handleAttachmentPreview, handleAttachmentDownload } = useAttachmentActions()
 
-  function attachmentMeta(row: Record<string, unknown>) {
+  function protocolAttachmentGroups(row: Record<string, unknown>) {
-    return getSourceProtocolAttachment(row)
+    return getSourceProtocolAttachmentGroups(row)
-  }
-
-  function consentAttachmentMeta(row: Record<string, unknown>) {
-    return getConsentProtocolAttachment(row)
   }
 
   function protocolStatusLabelBySource(status: string, source: string, voidType?: string): string {